The BSA weighing sensor is suitable for material testing machines, batching scales, and packaging scales

BSA of Transcell in the United StatesLoad CellIt's aS-type load cellThe material is made of high-quality alloy steel, with a wire length of 6 meters. It has the characteristics of simple, fast, stable and reliable installation, and is suitable for weighing machines such as material testing machines, ingredient scales, electromechanical combination scales, and packaging scales.
　

The BSA weighing sensor has a range of 25kg, 50kg, 100lb, and 250lb, and can also be equipped with explosion-proof models, with explosion-proof levels of Ex ia DCT4~T6 Ga.
　

　　The complete models of the American Power BSA are as follows:
　

BSA-25kg load cell

　　BSA-50kgLoad Cell

　　BSA-100lbLoad Cell

　　BSA-250lbLoad Cell
　

　　The technical parameters of the American Transforce BSA weighing sensor are as follows:
　

Rated output: 2.0mV/V& Plusmn; 0.1%/3.0mV/V& Plusmn; 0.1%

Zero balance:& Plusmn; 1% of rated output

Creep:& Plusmn; 0.03% of rated output

Nonlinear:& Plusmn; 0.03% of rated output

Lag:& Plusmn; 0.03% of rated output

Repeatability:& Plusmn; 0.03% of rated output

Sensitivity temperature drift:& Le; 0.002% of applied output/oC

Zero temperature drift:& Le; 0.002% of rated output/oC

Available temperature range: -10oC to+70oC

Temperature compensation range: 150%

Safe load: -10oC to+40oC

Input impedance: 387 ohms; Plusmn; 20 ohms

Output impedance: 350 ohms; Plusmn; 5 ohms

Insulation impedance:& Ge; 5000 M ohm (50V DC)

Recommended excitation voltage: 10V DC/AC

Maximum excitation voltage: 15V DC/AC

Wire length: 6m

Wire color: Red (+E) Black (- E) Green (+S) White (- S)