Introduction to the Characteristics and Advantages of German HBM Z7A Series Cantilever Beam Weighing Sensors

　　German HBMZ7A seriesLoad CellIt is a validated solution for large-scale load weighing, with a maximum load of 10T and the ability to weigh with C3 level accuracy. The type belongs toCantilever beam type weighing sensorIt is very suitable for tank scales, ingredient scales, and liquid level monitoring applications, and is widely used in the market.

The Z7A series weighing sensors belong to a 6-wire configuration and provide accurate measurement results up to C3 accuracy level, even with a maximum capacity of up to 10 metric tons (compliant with OIML R60). The sturdy Z7A weighing sensor is easy to integrate due to its large measuring body and ensures the required stability during operation. In addition, an optional explosion-proof IECEx ATEX design is also available.

The protection level of the Z7A cantilever beam type weighing sensor is IP67, which can effectively prevent the entry of moisture. The accuracy can be selected from D1 level and C3 level, where D1 level can have ranges of 500kg, 1T, 2T, 5T, and 10T, while C1 level can have ranges of 2T, 5T, and 10T. The complete range is as follows:

　　1-Z7AD1/500KG

　　1-Z7AD1/1T

　　1-Z7AD1/2T

　　1-Z7AD1/5T

　　1-Z7AD1/10T

　　1-Z7AC3/2T

　　1-Z7AC3/5T

　　1-Z7AC3/10T
　

The following is a specific introduction to the characteristics and advantages of the Z7A weighing sensor:

1. Due to the certified precision weighing sensor technology, the measurement results are accurate

(1) Accuracy level: D1, C3

(2) Powerful 6-wire configuration to compensate for resistance changes

2. Always reliable weighing

(1) IP67 protection level

(2) Galvanized steel (measuring body)

3. Widely used

(1) Provide different maximum capacities (500 kg, 1 t, 2 t, 5 t, and 10 t)

(2) Due to its 6-wire configuration, cables can be cut according to length

(3) Provide various cable lengths

(4) Optional to provide explosion-proof IECEx ATEX design