The American Tedia 1042 single point weighing sensor is suitable for retail scales, platform scales, and counting scales

Model 1042 isTedia, USAA slim model from Vishay TedeaSingle point weighing sensor, thisLoad CellThe model mainly has the advantages of small size, high accuracy, and low cost. The range can be from 1kg to 200kg, making it very suitable for retail scales, platform scales, and counting scales. It is designed for direct installation on weighing platforms.
　

The capacity of the 1042 weighing sensor of 5 kilograms and above is the standard configuration for electroplating anodized aluminum oxide, and the moisture-proof protective coating ensures long-term stability throughout the entire compensation temperature range. For flammable and explosive environments, Tedia provides explosion-proof models certified by ATEX, FM, and IECEx; For dynamic weighing applications, a high hardness version can be selected. In addition, 1042 is available with metric and UNC threads.
　

The protection level of the 1042 weighing sensor is IP66, approved by OIML R60 and NTEP, and the range can be selected as 1kg, 3kg, 5kg, 7kg, 10kg, 15kg, 20kg, 30kg, 50kg, 75kg, 100kg, 150kg, and 200kg. 150 kilograms and 200 kilograms were not approved by NTEP. The maximum platform size for the 1042 weighing sensor application is 400 * 400mm.
　

Two additional sensing lines provide feedback on the voltage reaching the weighing sensor. Full compensation for wire resistance changes caused by temperature changes and/or cable extension can be achieved by feeding this voltage into appropriate electronic devices.
　

The full range of the Tedia 1042 weighing sensor in the United States is as follows:
　

1042-1kg weighing sensor

1042-3kg load cell

1042-5kg load cell

1042-7kg load cell

1042-10kg load cell

1042-15kg load cell

1042-20kg load cell

1042-30kg load cell

1042-50kg load cell

1042-75kg load cell

1042-100kg load cell

1042-150kg load cell

1042-200kg load cell