Introduction to the Range and Materials of the STC Weighing Sensor from the United States

push time:2023-06-26 Popularity: source:1

The STC load cell belongs toAmerican ShiquanA brandS-type load cellMainly used in small and medium-sized ranges, it can withstand tensile or compressive loads. The materials of different ranges vary, and the protection level reaches IP67. It is suitable for electromechanical conversion scales, silo/hopper/tank weighing, crane scales, forklift scales, batching/filling, universal material testers, and tension/tension measurement.

　　STCLoad CellSupports bidirectional measurement (tension/compression), such as for measuring tension and tension. If the output is reasonable, it can be used for single or multi battery applications. The range can be selected from 5kg to 5T, with only 25kg to 2T ranges certified for NTEP III level 5000 and lllL10000.
　

　　美国世铨称重传感器图片
　

The material of the STC model should be divided according to the range, with the 5kg, 10kg, and 20kg ranges made of aluminum, and the English abbreviation for aluminum should be added after the model; Ldquo; AL& Rdquo;, For example, STC-5kgAL. The range material between 25kg and 5T is alloy steel, and there is no need to add a representation after the model word. For example, the complete model is STC-100kg. In addition, STC also provides a version made of stainless steel material, with the English abbreviation for stainless steel after the model; Ldquo; SS& Rdquo;, For example, STC-75kgSS.
　

　　 STC-5kgAL称重传感器图片
　

The size of STC weighing sensors varies across different ranges, with the length being the same while the width and height are different. There is also a special range in the STC model, which is STC-200kgSE, and SE is a small size; Ldquo; Small size& Rdquo; The abbreviation also means that the 200kg range will be smaller than other range sizes.
　

STC-200kgSE称重传感器图片
　