Introduction to the characteristics and applicable occasions of the American Tedia 355 corrugated pipe weighing sensor

　　Tedia, USA(Tedea) 355 seriesLoad Cellbelong toBellows weighing sensorSmall in size, thin in shape, with high precision, with a range of 5kg to 500kg, approved by OIML R60 and NTEP, suitable for low attitude platforms, weightless feeders, marine and mixed scales, belt scales, and other applications.

The 355 type is a welded bending load cell made of stainless steel, with a protection level of IP68. The sealed and moisture-proof 355 structure and polyurethane shielded cable enable the load cell to work in harsh environments while maintaining its operating standards.
.

The thinness, high precision, and sealing make this weighing sensor very suitable for thin platforms, weighing and packaging machinery, conversion of mechanical scales, and various other applications that require sealed sensors. For hazardous environments, this weighing sensor can be equipped with EEx ia IIC T6 certified products.

Two additional sensing lines provide feedback on the voltage reaching the weighing sensor. Complete compensation for wire resistance changes caused by temperature changes and/or cable extension is achieved by feeding this voltage into appropriate electronic devices.

The dimensions and technical parameters of the Tedia 355 weighing sensor in different ranges are the same, and its full range is as follows:

　　355-5kg

　　355-10kg

　　355-20kg

　　355-50kg

　　355-100kg

　　355-200KG

　　355-250kg

　　355-500kg