Product parameters and characteristics of German HBM C6B force sensor

C6B belongs toGerman HBM force sensorA model of the C6B force sensor adopts the principle of a compression rod, which is very suitable for measuring very large forces with very small displacements and is very suitable for high dynamic measurements, such as in impact tests or high dynamic measurement processes.

The characteristic of the German HBM C6B series is its excellent cost-effectiveness, especially for models with built-in amplifiers. The sensor is completely made of stainless steel, tightly sealed, and has a high degree of protection (IP68), making it widely used. Models up to 2 MN have an inner hole. This has been proven particularly useful in monitoring anchor or rope tension.

The accuracy level of the C6B force sensor is, with rated ranges of 200KN, 500KN, 1MN, 2MN, 5MN, and 10MN. The protection level is IP68, and the output can be selected as 2mV/V, 0... 10 V, or 4... 20 mA according to demand.
　

Specific parameters and characteristics of C6B force sensor:

1. Economically efficient and easy to use measuring equipment, suitable for various applications.

(1) Nominal range up to 10 MN

(2) For static and dynamic measurements

(3) Highly attractive cost-effectiveness

(4) Inner hole for easy use of folding arms (up to 2 MN)

2. Efficient: Suitable for multiple applications and immediately available.

(1) Output signal: mV/V, 0& Ndash; 10 V, or 4& Ndash; 20 mA

(2) Multiple options: fixed cable, plug, plug protection, and TEDS

(3) Can be installed horizontally and suspended

(4) Can be calibrated as a whole with loading accessories according to requirements

3. Durable and reliable measurement results.

(1) Sealed housing made of stainless steel material

(2) IP68 protection level (models with fixed cables)

(3) EMC certification meets IEC standards

(4) Resistance to vibration and shock