Introduction to the Product Models of German HBM HLC Series Cantilever Beam Weighing Sensors

　　German HBMHLC seriesLoad CellIt is a cantilever beam type weighing sensor with multiple models, versions, and accuracy levels available. It mainly has a small range, with a range of 100kg to 10T, high protection level, stainless steel material, sturdy and durable, and is suitable for almost any material tank, ingredient, platform scale, and level monitoring application.

The HLC series weighing sensors have a protection level of IP68 and IP69K, and can be used for a long time in humid, harsh or high-pressure environments. The cable adopts a six wire system, which can compensate for changes in cable and resistance, so it can be cut according to length.

　　HLCCantilever beam type weighing sensorThere are B1 version (standard version), B2 version (special protection), A1 type (with through-hole thread), F2 type (with blind hole), and IECEx ATEX (explosion-proof version) options, which can also be used as HLC/M weighing modules (special mechanical protection with weighing sensors). The accuracy level of HLC weighing sensors can be selected as D1 level, C3 level, and C6 level. Range options include 110kg, 220kg, 550kg, 1.1t, 1.76t, 2.2t, 4.4t, and 10t.

The complete model consists of series, version, accuracy, and range, such as HLCB2C3/550kg, HLCB1D1/2.2t, etc., where HLC is the series, B2 and B1 are the versions, C3 and D1 are the accuracy, and 550kg and 2.2T are the range.
　

The following is a specific introduction to the characteristics and advantages of HLC weighing sensors:

1. High precision, almost suitable for any application, such as trade scale weighing systems

(1) Accuracy level up to C6 (corresponding to OIML Level III)

(2) The 6-wire system can compensate for changes in cable and resistance, so the cable can be cut off and used.

(3) Trade scale certification up to 6000 divisions

(4) Multiple sensors can be used in parallel and optimized

2. Durable, suitable for harsh environments, and optional explosion-proof models

(1) Stainless steel material

(2) Optional TPE-0 cable sheath, chemical resistant

(3) EMC certification according to IEC EN 45501:2015 standard

(4) IP68/IP69K protection level, suitable for harsh humid and high-pressure environments

(5) Optional explosion-proof models (such as IECEx ATEX Zone 1/21)

3. Versatile player: Standard size, multiple range options available

(1) Provide different maximum capacities: 110 kg, 220 kg, 550 kg, 1.1 t, 1.76 t, 2.2 t, 4.4 t, and 10 t

(2) Metrological certification: OIML, NTEP (USA), NMIA (Australia), Russia

(3) Provide explosion-proof versions (IECEx/ATEX, FM (USA), EAC)

(4) All product versions have the same size and low height

(5) Due to the 6-wire configuration, cables can be cut according to their length

(6) Provide different cable types and lengths