German HBM U9C Micro Force Sensor - Dynamic and Static Tension and Compression Measurement

　U9C　Micro force sensor; Flash& Amp; Flash; Compact, highly dynamic, ready to use

The compact structure and high cost-effectiveness of the U9C force sensor make it suitable for reliable measurement of tensile and compressive forces in applications with limited space. It has a very high fundamental frequency, making it very suitable for high dynamic and fast measurements. Stainless steel material, laser welded seal, very sturdy and durable.

HBM accuracy level: 0.2
Range: 50N to 50kN

You can choose: In addition to previous passive versions, the U9C series now offers integrated amplifier models for you to choose from. This model of product can be used as a measurement chain for calibration, that is, to record the relationship between the input variable Newton and the output variable in volts (V) or milliamperes (mA) in the inspection report or calibration certificate.

Three major advantages of U9C:

1. Small, dynamic, and sturdy

Small diameter, flat design

Stainless steel welding; EMC testing

High stiffness, low weight, therefore having a high fundamental resonance frequency

Despite its compact structure, the sensor still has rust resistance and has passed EMC testing, making it suitable for high dynamic measurements.

2. Instant availability
Various cable lengths available for selection; Compatible drag chain resistant cable

Models without built-in amplifiers: TEDS chips are provided, and pre assembled plugs can be provided according to requirements

A time-saving plug and play solution that is very suitable for use in industrial environments.

3. Optional built-in amplifier
Replacing sensors with measurement chains: no additional measurement amplifiers required

Attached test report showing the relationship between force and output signal (in V or mA)

Zeroing by controlling the output terminal

The low-cost measurement chain greatly simplifies the debugging process.

Integrated amplifier U9C
There are two active models of U9C force sensors: VA1 with voltage output (0-10 V) and VA2 with current output (4& 20 mA).



The attributes of the sensor and amplifier match each other:




For detailed information on U9C, please click on:http://www.zhongxintmt.com/lcgqhz/HBM/3810.html

German HBM sensor related products can be found at:http://www.zhongxintmt.com/deguo/hbm/list_104_1.html

Hot selling brand products:German HBM，Middle Kessel，Toledo，American Shiquan，美国传力，Tedia, USA