The American Power SBS cantilever beam weighing sensor is suitable for platform scales, mixing stations, belt scales, and ingredient scales

The SBS load cell isTranscellA brandCantilever beam type weighing sensorThe model is made of alloy steel material, which has the advantages of high precision, high stability, easy installation, and speed. It is suitable for equipment such as platform scales, mixing stations, belt scales, and ingredient scales.

　　SBSLoad CellMade of high-quality alloy steel, with a nickel plated surface for anti-corrosion treatment, it can effectively isolate dust and moisture, avoiding affecting the accuracy and service life of the sensor.

The range of SBS can be selected as 250lb, 250kg, 500kg, 1T, 1.5T, 2T, 2.5T, 5T, 7.5T, and 10T. The SBS model also offers two ranges, SBS-2.5ts and SBS-7.5ts. Adding S after the model represents a small threaded hole, while models without S represent a large threaded hole. The SBS model is certified by NTEP, CMC, and OIML.

The technical parameters of the American Transforce SBS weighing sensor are as follows:

Rated output: 3.0mV/V& Plusmn; 0.1%

Zero balance:& Plusmn; 1% of rated output

Creep:& Plusmn; 0.03% of rated output

Nonlinear:& Plusmn; 0.03% of rated output

Lag:& Plusmn; 0.03% of rated output

Repeatability:& Plusmn; 0.03% of rated output

Sensitivity temperature drift:& Le; 0.002% of applied output/oC

Zero temperature drift:& Le; 0.002% of rated output/oC

Available temperature range: -10oC to+70oC

Temperature compensation range: 150%

Safe load: -10oC to+40oC

Input impedance: 387 ohms; Plusmn; 20 ohms

Output impedance: 350 ohms; Plusmn; 5 ohms

Insulation impedance:& Ge; 5000 M ohm (50V DC)

Recommended excitation voltage: 10V DC/AC

Maximum excitation voltage: 15V DC/AC

Wire length: 6m

Wire color: Red (+E) Black (- E) Green (+S) White (- S)