SWB ME alloy steel static load weighing module, available in the range of 500kg to 5T from the American Kessel brand

1、 Product Introduction of SWB ME Weighing Module from the US ZXSCELL Brand

Product brand:ZXSCELL in the United States ZXSCELL

Product series:SWB ME

Product Type:Weighing Module Static load weighing module

Product Range: 500kg, 1T, 1.5T, 2T, 3T, 5T

Product Introduction: The SWB ME static load weighing module is compatible with ZXSCELL's SLBC-ME series cantilever load cell, with a rated range of 500kg to 5T The powerful functions of the SWB ME weighing module enable it to easily meet the static load weighing requirements in industrial production

Product features:

(1) Alloy steel material with nickel plating on the surface

(2) Using SLBC-ME sensors

(3) Support bolts to prevent equipment from overturning

(4) Spherical connector, maintain vertical weighing state

(5) Suitable for electronic platform scales, mixing plants, and ingredient scales, etc

二、美国中克塞尔品牌 SWB ME称重模块图片

三、SWB ME称重模块产品型号

SWB ME 500kg

SWB ME 1t

SWB ME 1.5t

SWB ME 2t

SWB ME 3t

SWB ME 5t

四、称重模块现场安装注意事项

Before installation, please check the foundation condition. Each installation point plane is perpendicular to the stress surface, and the levelness of the same foundation surface should be controlled within 1mm/m. The foundation bearing capacity should be greater than the range of the sensor

1) Before installing the module, please adjust the sensor and upper board to a horizontal state;

2) After the module installation is completed, please adjust the limit properly;

3) The pendulum support is mainly used to prevent equipment from overturning and is not used for weighing and measuring. It has a certain gap with the bearing plate and the pendulum support nut is locked tightly;

4) Cable color code (conventional sensor wire code, mainly based on certificate of conformity wire code)

Note: During equipment debugging, if there is a large angle difference, poor instrument return to zero, or a small or no change in weight value after weight loading, please check if the module limit part is stuck or slightly affected by friction; Check the peripheral hardware connections of the device for external forces, such as the impact of dead connections in pipelines on weighing