1、 Product Introduction of ZXM-P1 Weighing Display Controller
Product brand: Axel, USA
Product Series: ZXM-P1
Product type: Weighing display controller
Product features:
1. Suitable for all resistance strain bridge weighing sensors
2. Full panel digital calibration, simple process, convenient and intuitive
3. Digital filtering function, automatic zero tracking function
4. Automatic reset function when powered on
5. Bidirectional isolation serial port function, with RS485 and RS232 for convenient communication with the upper computer
6. The weight display can be remotely calibrated (with the remote calibration switch turned on)
7. Equipped with PROFINET fieldbus interface
8. Supports Ethernet IP communication and can access Ethernet IP networks
9. Suitable for concrete mixing and asphalt mixing equipment, metallurgy and chemical industry, weight control of feed, etc
2、 ZXM-P1 Weighing Display Controller Product Actual Photo
3、 Application of ZXM-P1 Weighing Display Controller Function
1. RS-232 point-to-point serial communication
(1) Continuous output or command output format
(2) Provide fully compatible protocols for users to quickly upgrade
(3) Support remote zeroing and tare weight operation
(4) ESD anti-static interface protection
2. RS-485 multi-point serial communication
(1) The baud rate can be selected between 2400 and 115200bps
(2) Communication response time less than 5ms
(3) As a slave station supporting data collection for the master station
(4) Support MODBUS RTU slave protocol
3. Analog output interface
(1) Supports multiple analog output formats, including 0~10V, 0~5V, 4~20mA, and 0~24mA.
(2) 16 bit analog output accuracy: 1/32767
(3) Weight as analog output can be adjusted on the panel without the need for loading
4. Weighing and measuring
(1) Weight display accuracy: selectable from 100 to 100000.
(2) AD is a bipolar mode that supports bidirectional force and offers multiple data filtering options to meet the needs of different dynamic/static applications
(3) Keyboard or remote reset, tare weight operation and calibration
(4) Maintain peak and valley values
5. 10/100M Industrial Ethernet Interface
(1) Connect to the upper PC or PLC through a switch
(2) RJ-45 standard interface, including network status indication
(3) Communication speed 10/100M, unlimited data from the slave station
(4) Simple and easy-to-use TCP/UDP protocols and controls
(5) Support dynamic/static network systems
6. Upper and lower limit alarm output
(1) The keyboard can set upper and lower limit alarm values
(2) Alarm point outputs through built-in relay dry contacts
(3) Supporting replenishment function in tank weighing
(4) Some models only support 3 alarm points
7. Weight preset point output application
(1) The keyboard can set up to 4 preset point values, while some models only support 3 preset points, depending on the hardware selection
(2) The preset point value is output through the built-in relay dry contact
(3) The preset point status is manifested as the comparison result between the preset value and the absolute value of the displayed value (gross weight or net weight)
8. Simple automatic constant value addition/discharge control
(1) Support fixed value feeding or fixed value discharging control
(2) The keyboard can preset four target weight values
(3) The relay automatically controls the corresponding valve
(4) The input/output control interface function can be manually set
4、 Product parameters of ZXM-P1 weighing display controller
Sales Engineer - Miss Chen