. DZM-X1 high-precision weighing and Transcell module product introduction
Product brand: ZXSCELL, USA
Product series: DZM-X1
Product type: Weighing Transcell module
Product features:
1. Remote parameter configuration and instrument status monitoring can be achieved through network device connection
2. I/O port logic programmable (compatible with Mitsubishi PLC programming software)
3. Stainless steel shell, compact size, strong industrial feel
4. Rich configuration interfaces with multiple combinations of optional interfaces
5. Standard version configuration: RS485+RS485/RS232 (fixed)
6. Weightless calibration, editable startup logo, instrument I/O port testing and serial port testing functions
7. The printing content is optional, and the information at the beginning and end of the printed bill can be edited
8. Suitable for lithium batteries, chemicals, feed, concrete mixing, asphalt mixing equipment, metallurgical blast furnaces and converters, etc
. Actual photo of DZM-X1 weighing and Transcell module product
. Application of DZM-X1 Weighing Transmission Module Function
1. RS-232 point-to-point serial communication
(1) Continuous output or command output format
(2) Provide fully compatible protocols for users to quickly upgrade
(3) Support remote zero and tare operations
(4) ESD anti-static interface protection
2. RS-485 multidrop serial communication
(1) Baud 2400~115200bps optional
(2) Communication response time less than 5ms
(3) As a slave station supporting data collection from the master station
(4) Support MODBUS RTU slave protocol
3. Analog output interface
(1) Supports multiple analog output formats, including 0-10V, 0-5V, 4-20mA, and 0-24mA.
(2) 16 bit analog output accuracy: 1/32767
(3) The weight can be output as an analog quantity without loading, and the analog quantity can be adjusted on the panel
4. Weighing and measuring
(1) Weight display accuracy: 1/1000000.
(2) Bluetooth communication, with rich interfaces and multiple combination interfaces.
(3) No weight calibration, printing content optional.
(4) Instrument I/O port testing and serial port testing functions.
(5) The instrument can be connected to a mobile app to monitor status and configuration parameters.
5. 10/100M Industrial Ethernet interface
(1) Connect to the upper PC or PLC through a switch
(2) RJ-45 standard interface, including network status indication
(3) Communication rate 10/100M, unlimited slave data
(4) Simple and easy-to-use TCP/UDP protocol and controls
(5) Support for dynamic/static network systems
6. Upper and lower limit alarm output
(1) Keyboard can set upper and lower limit alarm values
(2) The alarm point is output through the built-in relay dry contact
(3) Support for replenishment function in tank weighing
(4) Some models only support 3 alarm points
7. Application of preset point mode quantitative weighing
(1) The keyboard can set up to 4 preset point values, and some models only support 3 preset points, depending on the hardware selection
(2) The preset point value is output through the built-in relay dry contact
(3) The preset point state is represented by the comparison of the absolute value between the preset value and the displayed value (gross or net weight)
8. Serial quantitative weighing and batching of multiple materials and networking
(1) Support constant value feeding or constant value discharge control
(2) The keyboard can preset four target weight values
(3) Relay automatically controls the corresponding valve
(4) Automatic correction of feeding and discharging accuracy
(5) Input/output control interface functions can be manually set
. DZM-X1 Weighing and Transmission Module Product Parameters
Sales Engineer - Miss Chen