PGW MH weighing module, available in the range of 10T to 50T from the American Kessel brand

1、 Product Introduction of PGW MH Weighing Module from the US ZXSCELL Brand

Product brand:ZXSCELL in the United States ZXSCELL

Product series:PGW MH

Product Type:Weighing Module

Product Range: 10T, 20T, 30T, 40T, 50T

Product Introduction: The PGW MH weighing module is compatible with ZXSCELL's PGDxH Series weighing sensors, with a rated range of up to 50 tons. The powerful structural components provide comprehensive protection for the equipment, and the self resetting sensor generates a restoring force during dynamic weighing. It automatically returns the weighing platform to a stable position, making weighing precise and reliable

Product features:

(1) Alloy steel material with nickel plating on the surface

(2) Using PGDxH column sensors

(3) Support bolts to prevent equipment from overturning

(4) Self restoring pendulum load cell

(5) Suitable for truck scales, platform scales, and large hopper scales, etc

二、美国中克塞尔品牌 PGW MH称重模块图片

三、PGW MH称重模块产品型号

PGW MH 10t

PGW MH 20t

PGW MH 30t

PGW MH 40t

PGW MH 50t

四、称重模块现场安装注意事项

Before installation, please check the foundation condition. Each installation point plane is perpendicular to the stress surface, and the levelness of the same foundation surface should be controlled within 1mm/m. The foundation bearing capacity should be greater than the range of the sensor

1) Before installing the module, please adjust the sensor and upper board to a horizontal state;

2) After the module installation is completed, please adjust the limit properly;

3) The pendulum support is mainly used to prevent equipment from overturning and is not used for weighing and measuring. It has a certain gap with the bearing plate and the pendulum support nut is locked tightly;

4) Cable color code (conventional sensor wire code, mainly based on certificate of conformity wire code)

Note: During equipment debugging, if there is a large angle difference, poor instrument return to zero, or a small or no change in weight value after weight loading, please check if the module limit part is stuck or slightly affected by friction; Check the peripheral hardware connections of the device for external forces, such as the impact of dead connections in pipelines on weighing