search
top search: ZXSCELLAmerican CeltronTedea, USAAmerican TranscellGerman HBMMettler Toledo
product core

    PGR MN weighing module, available in the range of 1T to 150T from the US Zhongkessel brand

    product details


    1、 Product Introduction of PGR MN Weighing Module from the US ZXSCELL Brand


    Product brand:ZXSCELL in the United States ZXSCELL

    Product series:PGR MN

    Product Type:Weighing Module

    Product Range: 1T, 2.2T, 3.3T, 4.7T, 10T, 15T, 22T, 33T, 47T, 68T, 100T, 150T

    Product Introduction: The PGR MN weighing module is compatible with ZXSCELL's GDxN Series weighing sensors, with a rated range of up to 150 tons, and can perform C3 level precise weighing The powerful structural components provide comprehensive protection for the equipment, with elastic suction cups and limit devices to ensure the stability of the equipment

    Product features:

    (1) Alloy steel material with nickel plating on the surface

    (2) Using GDxN sensors

    (3) Suitable for hopper scales, storage scales, and tank scales, etc

    (4) Protection level IP67

    (5) Equipped with elastic suction cups and limit devices


    二、美国中克塞尔品牌 PGR MN称重模块图片


    三、PGR MN称重模块产品型号


    PGR MN 1t

    PGR MN 2.2t

    PGR MN 3.3t

    PGR MN 4.7t

    PGR MN 10t

    PGR MN 15t

    PGR MN 22t

    PGR MN 33t

    PGR MN 47t

    PGR MN 68t

    PGR MN 100t

    PGR MN 150t


    四、称重模块现场安装注意事项


    Before installation, please check the foundation condition. Each installation point plane is perpendicular to the stress surface, and the levelness of the same foundation surface should be controlled within 1mm/m. The foundation bearing capacity should be greater than the range of the sensor

    1) Before installing the module, please adjust the sensor and upper board to a horizontal state;

    2) After the module installation is completed, please adjust the limit properly;

    3) The pendulum support is mainly used to prevent equipment from overturning and is not used for weighing and measuring. It has a certain gap with the bearing plate and the pendulum support nut is locked tightly;

    4) Cable color code (conventional sensor wire code, mainly based on certificate of conformity wire code)

    Note: During equipment debugging, if there is a large angle difference, poor instrument return to zero, or a small or no change in weight value after weight loading, please check if the module limit part is stuck or slightly affected by friction; Check the peripheral hardware connections of the device for external forces, such as the impact of dead connections in pipelines on weighing


    product recommendation

    online service
    contact information

    Sales hotline:

    Miss Chen: 18520271262

      Miss Xie: 18688494254

    Mr. Huang: 18688492451

    Working hours:

    Monday to Saturday9:0018:00

    WeChat
    Scan and contact us
    Online Service