TLE analog weight transmitter, Italian brand Laumas

1、 Product Introduction

Product brand: LAUMAS, Italy

Product Series: TLE

Product type: Analog weight transmitter - RS485

Product Description:

(1) The weight transmitter is suitable for installation on the back panel of Omega/DIN rails or junction boxes (as required).

(2) Size: 90x95x60 millimeters.

(3) Backlit alphanumeric LCD display screen, two rows of 8-digit (5mm high), visible area: 38x16mm.

(4) 3-way selection switch, DIP switch, and control knob.

Input/Output and Communication:

(1) 16 bit high-speed analog output for current or voltage (response time: 3 milliseconds).

(2) RS485 serial port, used for communication through ModBus RTU, ASCII Laumas, or continuous unidirectional transmission protocol.

(3) 4 dedicated input terminals for weighing sensors.

Main functions:

(1) Connect to

-Connect PLC through analog output;

-Connect PC/PLC via RS485 (up to 99 instruments can be connected with line repeater, and up to 32 instruments can be connected without line repeater);

-Up to 8 weighing sensors can be connected in parallel through the junction box.

(2) Zero and full scale adjustments can be made without the need for a multimeter.

(3) Simultaneously display the response signal of the weighing sensor in mV and the analog output value.

(4) Digital filters can reduce the impact of weight oscillations.

(5) Theoretical calibration (via keyboard) and actual calibration (using weight samples).

(6) Tare zero setting.

2、 Technical parameters

3、 Product images