. Introduction to German HBM brand S2M force sensor
The German HBM S2M/10N force sensor is used for tension and compression force measurement, widely used in various static and dynamic measurement applications, with high protection level, high lateral force stability, and six wire circuit.
Guangzhou Zhongxin Automation Technology Co., Ltd. sells the full series of German HBM S2M force sensors, ensuring that the force sensors are genuine and have quality assurance. We can provide free technical support and comprehensive after-sales service at a reasonable price. Please contact us at 18520271262 for specific prices, and we will provide you with the most affordable quotation.
Product series: S2M series force sensors
Product features:
-Tension/pressure sensor
-Accuracy level 0.02
-Nominal (rated) force: 10N, 20N, 50N, 100N, 200N, 500N, 1000N
-High protection level (IP67)
-High lateral force stability
-Six wire circuit
. Actual photo of German HBM brand S2M force sensor
. Product parameters of German HBM brand S2M force sensor
. Dimensions of German HBM brand S2M force sensor products
. All ranges of the German HBM brand S2M force sensor series are as follows:
S2M/10N
S2M/20N
S2M/50N
S2M/100N
S2M/200N
S2M/500N
S2M/1000N
. Safety instructions for S2M force sensor
1. Intended use
The S2M type force sensor is specifically designed to measure static and dynamic tensile and/or compressive forces within the load limit range specified in various load limit specifications. Any other use is not intended.
To ensure safe operation, always comply with the provisions in the installation and operation instructions, as well as the data specified in safety rules, regulations, and technical data sheets. It is also necessary to comply with applicable laws and safety regulations for relevant applications.
The force sensor is not intended as a safety component. The correct and safe operation of force sensors requires proper transportation, storage, setup, and installation, as well as careful operation.
2. Operator
The installation and operation of force sensors must be carried out by fully qualified personnel. Qualified personnel in this regard refer to those entrusted with the installation, installation, start-up, and operation of products, who are familiar with the operation of force sensors and have corresponding functional qualifications.
3. Carrying capacity limit
When using force sensors, the information in the technical data sheet must be followed. Especially, the maximum load specified by each shall not be exceeded.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ German HBM:Load Cell--Series Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2, etc ★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh, USA: 341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen