. Introduction to the German HBM brand S9M force sensor
The German HBM brand S9M force sensor is used for measuring tensile and compressive forces, and is widely used in various static and dynamic measurement applications. Its use is plug and play, saving time and eliminating the need for on-site welding or assembly of plugs.
Guangzhou Zhongxin Automation Technology Co., Ltd. sells the full series of force sensors under the German HBM brand S9M, ensuring that the force sensors are genuine and of good quality. We offer free technical support and comprehensive after-sales service at a reasonable price. Please feel free to contact us by phone for specific prices, and we will provide you with the most affordable quotation.
Product series: S9M series force sensors
Product features:
(1) Accuracy level: 0.02
(2) Range: 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 50KN
(3) High precision and sturdy reliability
(4) Material: stainless steel, sealed by Laser beam welding
(5) The temperature dependence of zero point is very low, and it is tightly sealed
(6) The influence of parasitic torque and force on measurement results is very small
. Actual photo of German HBM brand S9M force sensor
. Product parameters of German HBM brand S9M force sensor
. Dimensions of German HBM brand S9M force sensor products
. All ranges of the German HBM brand S9M force sensor series are as follows:
S9M/500N force sensor
S9M/1KN force sensor
S9M/2KN force sensor
S9M/5KN force sensor
S9M/10KN force sensor
S9M/20KN force sensor
S9M/50KN force sensor
. Safety instructions for S9M force sensor
1. Intended use
The S9M type force sensor is specifically designed to measure static and dynamic tensile and/or compressive forces within the load limit range specified in various load limit specifications. Any other use is not intended.
To ensure safe operation, always comply with the provisions in the installation and operation instructions, as well as the data specified in safety rules, regulations, and technical data sheets. It is also necessary to comply with applicable laws and safety regulations for relevant applications.
The force sensor is not intended as a safety component. The correct and safe operation of force sensors requires proper transportation, storage, setup, and installation, as well as careful operation.
2. Operator
The installation and operation of force sensors must be carried out by fully qualified personnel. Qualified personnel in this regard refer to those entrusted with the installation, installation, start-up, and operation of products, who are familiar with the operation of force sensors and have corresponding functional qualifications.
3. Carrying capacity limit
When using force sensors, the information in the technical data sheet must be followed. Especially, the maximum load specified by each shall not be exceeded.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ German HBM:Load Cell--Series Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2, etc ★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh, USA: 341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen