1、 Introduction to the German HBM brand C9C force sensor
The German HBM brand C9C force sensor is used for measuring compressive force, with an accuracy level of 0.2 and a nominal (rated) force of 50N to 50KN. It has high rigidity and is particularly suitable for dynamic measurement tasks.
Guangzhou Zhongxin Automation Technology Co., Ltd. sells the full range of German HBM brand C9C force sensors, ensuring that the force sensors are original and authentic, with quality assurance. We can provide free technical support and complete after-sales service. The price is reasonable. For specific prices, please call us at 18520271262 and we will give you the most affordable quotation.
Product series: C9C series force sensor
Product features:
-Compact design compression force sensor
-Accuracy level 0.2
-Nominal (rated) force 50N to 50KN, optional 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 50KN
-Different cable lengths, plug components, and TED can be configured according to requirements
-Made of non rusting materials
-High rigidity, especially suitable for dynamic measurement tasks
2、 Actual photo of German HBM brand C9C force sensor
3、 German HBM brand C9C force sensor product parameters
Dimensions of German HBM C9C/50N force sensor products
The range of the German HBM C9C force sensor series is as follows:
C9C/50N force sensor
C9C/100N force sensor
C9C/200N force sensor
C9C/500N force sensor
C9C/1KN force sensor
C9C/2KN force sensor
C9C/5KN force sensor
C9C/10KN force sensor
C9C/20KN force sensor
C9C/50KN force sensor
German HBM C9C/50N Force Sensor Safety Instructions
Expected use
To ensure safe operation, always follow the regulations in the installation and operation instructions, as well as the data specified in safety rules, regulations, and technical data sheets. It is also necessary to comply with the applicable laws and safety regulations of the relevant applications.
The force sensor is not intended to be used as a safety component. The correct and safe operation of force sensors requires proper transportation, storage, installation, and careful handling.
Operator
The installation and operation of force sensors must be carried out by fully qualified personnel. Qualified personnel in this regard refer to personnel commissioned to install, install, start, and operate products, who are familiar with the operation of force sensors and have corresponding functional qualifications.
Load bearing capacity limit
When using force sensors, it is necessary to follow the information in the technical data sheet. Especially not exceeding the maximum load specified by each party.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure brand new and authentic products with excellent prices. Welcome new and old customers to inquire!
★ German HBM:The weighing sensor--Series Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2, etc ★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Shiquan Celltron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB and other series
★ Tedea shantleigh from the United States: - Series 341061635510151041022126041240, etc
★ Transcell from the United States: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: Weighing sensors - TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: Control instruments - IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen