ZXM06 Weighing Display Controller - American Zhongkessel Brand Weighing Instrument

. ZXM06 Weighing Display Controller Product Introduction

Product brand: ZXSCELL, USA

Product series: ZXM06

Product type: weighing display controller, weighing instrument

Product features:

1. Embedded anti EMC interference circuit with strong anti electromagnetic interference ability and stable data

2. Three calibration methods: weight calibration, calibration parameter modification, and sensitivity input calibration (weight free calibration)

3. Selectable RS232 or RS485, supporting Modbus RTU communication with multi word continuous read and write function

4. Automatically start jog feeding when the actual feeding weight exceeds the tolerance

5. The number of cycles of ingredients can be set, supporting the function of infinite cycles of ingredients

6. Accumulation function of batching times, and upper computer reading function of actual batching weight

7. Support a series of operations such as resetting, peeling, ingredient start and stop for upper computer communication

8. The relay output mode can be set to: sorting, constant value, quantification, reduction, batching, sorting, peak value, etc

9. Applicable to industrial sites such as building materials, chemicals, grain, metallurgy, etc

. Actual photo of ZXM06 weighing display controller product

. Application of ZXM06 Weighing Display Controller Function

1. RS-232 point-to-point serial communication

(1) Continuous output or command output format

(2) Provide fully compatible protocols for users to quickly upgrade

(3) Support remote zero and tare operations

(4) ESD anti-static interface protection

2. RS-485 multidrop serial communication

(1) Baud 2400~115200bps optional

(2) Communication response time less than 5ms

(3) As a slave station supporting data collection from the master station

(4) Support MODBUS RTU slave protocol

3. Analog output interface

(1) Supports multiple analog output formats, including 0-10V, 0-5V, 4-20mA, and 0-20mA.

(2) 16 bit analog output accuracy: 1/32767

(3) The weight can be output as an analog quantity without loading, and the analog quantity can be adjusted on the panel

4. Weighing and measuring

(1) Weight display accuracy: 1/10000.

(2) 24BIT Σ-Δ Type A/D conversion, maximum A/D pulse count: 1000000.

(3) Support a series of operations such as upper computer communication reset, peeling, ingredient start and stop, etc.

5. 10/100M Industrial Ethernet interface

(1) Connect to the upper PC or PLC through a switch

(2) RJ-45 standard interface, including network status indication

(3) Communication rate 10/100M, unlimited slave data

(4) Simple and easy-to-use TCP/UDP protocol and controls

(5) Support for dynamic/static network systems

6. Upper and lower limit alarm output

(1) Keyboard can set upper and lower limit alarm values

(2) The alarm point is output through the built-in relay dry contact

(3) Support for replenishment function in tank weighing

(4) Some models only support 3 alarm points

7. Weight preset point output application

(1) The keyboard can set up to 4 preset point values, and some models only support 3 preset points, depending on the hardware selection

(2) The preset point value is output through the built-in relay dry contact

(3) The preset point state is represented by the comparison of the absolute value between the preset value and the displayed value (gross or net weight)

8. Multiple output modes for automatic constant value feeding/discharging control

(1) Support constant value feeding or constant value discharge control

(2) Four target weight values can be preset

(3) Manual relay output modes (up to 13)

(4) Relay automatically controls the corresponding valve

(5) Automatically start jog feeding when the actual feeding weight exceeds the tolerance

(6) Input/output control interface functions can be manually set

(7) Accumulative function of batching times, actual batching weight upper computer

(8) Read function

. ZXM06 Weighing Display Controller Product Parameters