200L/15-200L pneumatic liquid weighing and filling machine with adjustable height

200L/15-200L liquid weighing and filling machine

The material flows into the inlet pipeline of the filling machine, and the pneumatic double valve filling flow rate is fast first and then slow, using a weighing filling method. The main body of the machine is made of stainless steel material, with a filling capacity of 200/15-200L. This model of machine can inject most high and low viscosity, particle free, non explosive liquids, and is widely used in industries such as lubricating oil, hydraulic oil, cutting fluid, antifreeze, glass water, polyurethane, cosmetics, and daily chemical products.

Features: - Efficient, hygienic, and safe

1. Dual valve control, two-stage filling speed (fast first and then slow);

2. Fast filling speed, 1 barrel/minute;

3. The weighing platform is low, with a height of about 240mm. The front and rear roller slides are flexibly connected and fastened, making it convenient to move the bucket up and down;

4. After filling, there is no dripping from the filling nozzle;

5. Manual screw lifting for filling head, suitable for buckets of different heights;

6. The weighing platform is equipped with a brake system to ensure that the bucket does not move during the filling process;

7. Touch screen operation, easy to understand, parameter settings;

8. Safety: If the filling valve is not opened, the upstream automatically does not feed to prevent pipe burst; When the filling nozzle collides with the bucket, do not fill to prevent materials from spraying on the periphery of the bucket.

　　Product technical parameters

Model: ZH-200B

Filling method: material flow/dual valve fast/slow/weighing filling

Pouring position: below the barrel mouth, above the liquid level for pouring

Pouring weight: 200L/15-200L

Applicable barrel type: barrel height 800-920mm/300-920mm, barrel diameter less than 600mm, barrel mouth greater than 60mm

Display division: 0.1kg

Perfusion accuracy: ± 0.2%

Infusion speed: 1 barrel per hour (according to the standard of 200L)

Pump type: None

Anti drip method: vacuum suction device with high anti drip level

Scale table size: 650 * 650mm: roller

Perfusion nozzle diameter: outer diameter 45mm Perfusion nozzle

Feed pipe diameter: quick fitting leather pipe joint with an outer diameter of 50mm

Power supply: three-phase AC 220V: 50Hz

Power: 1kw

Compressed air: 0.4-0.6MPa

Machine size: 2500 * 1100 * 1600mm

Machine weight: approximately 200 kilograms