K-PW16A-N-MR-500-N-3-N weighing sensor German HBM non-standard single point weighing sensor

1、 K-PW16A-N-MR-500-N-3-N Weighing Sensor Product Introduction

Product brand:German HBM

Product series: K-PW16A

Product range: 500kg

Product type: Non standard single point weighing sensor

Product Introduction

(1) The PW16A single point weighing sensor has a short stabilization time, making it suitable for many industrial applications involving high cycle rates. For example, in weighing scales, fluid and gas filling, or weighing of building materials. PW16A has high stiffness and adopts the proven HBK strain gauge technology, so it can provide accurate results that meet the C3 multi range accuracy level even at very high weighing speeds.

(2) PW16A offers 10 different maximum ranges (ranging from 30 to 660 kg) and comes with multiple optional configurations and cable lengths, making it an ideal solution to meet personalized needs. Thanks to its integrated eccentric load compensation function, this product is highly suitable for single point applications involving large weighing platforms with a maximum size of 600 x 600 mm. In addition, a version with balanced signal output is also available for parallel connection. This single point weighing sensor is based on 6-wire technology, and its cable shielding layer is connected to the measuring body, so it can provide reliable measurement data even in environments affected by electromagnetic interference. The test certificate confirms that PW16A has been approved for legal metrology applications. In addition, explosion-proof versions that comply with IECEx+ATEX standards are also available.

Product Features:

1. High measurement accuracy

(1) Accurate weighing that meets the C3 (multi range) accuracy level

(2) Adopting 6-wire technology to ensure stable measurement signals

(3) The cable shielding layer is connected to the casing to ensure excellent electromagnetic compatibility (EMC)

(4) Eccentric load compensation up to 0.0233%

(5) With its proven HBK strain gauge technology, it is highly suitable for dynamic measurement tasks

Thanks to HBK strain gauge technology, accurate measurement data can be obtained even during high-speed weighing.

2. Widely used

(1) Suitable for large weighing platforms with a maximum size of 600 x 600 mm

(2) Provide ten different maximum ranges (30 kg, 50 kg, 75 kg, 100 kg, 150 kg, 200 kg, 250 kg, 300 kg, 500 kg, and 660 kg)

(3) Provide four different lengths of cables, ranging from 1.5 meters to 12 meters

(4) Attached test certificate, in compliance with trade metrology requirements (according to OIML R60 standard)

(5) Provide models with balanced signal output and support parallel connection

Suitable for a wide range of application scenarios, providing multiple maximum weighing ranges

3. Use safety

(1) Durable aluminum measuring body with silicone rubber casing

(2) IP67 protection level, moisture-proof and dustproof

(3) Also provide explosion-proof models (IECEx+ATEX Zone 1+21, Zone 2+22)

With its explosion-proof design and IP67 protection rating, it is highly suitable for industrial applications

2、 Partial models of K-PW16A series weighing sensor products

K-PW16A-N-MR-30-N-3-N

K-PW16A-N-MR-50-N-3-N

K-PW16A-N-MR-75-N-3-N

K-PW16A-N-MR-100-N-3-N

K-PW16A-N-MR-150-N-3-N

K-PW16A-N-MR-200-N-3-N

K-PW16A-N-MR-250-N-3-N

K-PW16A-N-MR-300-N-3-N

K-PW16A-N-MR-500-N-3-N

K-PW16A-N-MR-30-N-6-N

K-PW16A-N-MR-50-N-6-N

K-PW16A-N-MR-75-N-6-N

K-PW16A-N-MR-100-N-6-N

K-PW16A-N-MR-150-N-6-N

K-PW16A-N-MR-200-N-6-N

K-PW16A-N-MR-250-N-6-N

K-PW16A-N-MR-300-N-6-N

K-PW16A-N-MR-500-N-6-N

3、 Actual photo of K-PW16A non nominal heavy sensor product

4、 K-PW16A Non standard Series Selection Guide

5、 K-PW16A-N-MR-500-N-3-N Weighing Sensor Product Dimensions

6、 Product parameters of K-PW16A-N-MR-500-N-3-N weighing sensor