U10F/125KN force sensor German HBM ultra-thin force sensor

1、 U10F/125KN Force Sensor Product Introduction

Product brand:German HBM

Product series: U10F

Product range: 125KN

Accuracy level: 0.04... 0.05

Product Type: Force Sensor

Product Introduction

(1) Like the proven U10M and C10 sensors, the U10F series ultra-thin force sensor adopts the principle of shear force sensor measurement, enabling it to achieve the same excellent accuracy and smaller deflection as its sister models. This makes the U10F force sensor suitable for quickly collecting dynamic force trends and static forces.

(2) The sensor is tightly sealed and made of stainless steel. Compared to sensors with central threads, the flange connections on both sides greatly simplify the installation process. HBK also offers bolt kits with anti-corrosion coatings. The coating also ensures uniformity and low friction coefficient, without the need for lubrication or polishing of the bolts.

(3) U10F, like its sister models U10M and C10, has a variety of practical accessories that can be flexibly adjusted to adapt to different measurement tasks.

Product Features:

1. Accurate

(1) Reference accuracy

(2) TC0 is only 150 ppm/10K (inline amplifier is only 75 ppm/10K)

(3) Low linear error (0.035-0.05%, depending on the range, inline digital amplifier is only 0.005%)

(4) Very low hysteresis error (0.04-0.05%, depending on the range)

Today's investment in accuracy will ensure long-term cost-effectiveness. High precision makes the measurement range wider. Perform multiple measurement tasks using the same sensor.

2. Durable and sturdy

(1) Made of stainless steel with IP68 protection level (with cable option)

(2) Overload protection

(3) Even when operating at full range in alternating tension/compression mode, it has high fatigue strength

(4) Vibration, impact, and EMC testing comply with international standards

(5) Sensor health monitoring alerts you in case of exceeding mechanical or thermal limits (sensors with inline amplifiers)

U10F is a very reliable product. Even under difficult conditions, HBK climate and EMC testing ensure its safe operation. The inline amplifier option further enhances its reliability.

3. Easy to install and highly adaptable

(1) Easy to install with screw connections - all you need is a torque wrench

(2) High strength, corrosion-resistant screws can be provided as installation kits (including detailed information on maximum parasitic load and torque)

(3) Practical configuration options, such as dual bridge, various plug and cable options, TEDS, etc

(4) Optional IO-LINK output

Install quickly and reliably using standard tools. Clarify and standardize the mechanical load-bearing capacity in actual use!

2、 U10F series force sensor product model

U10F/50KN

U10F/125KN

U10F/250KN

U10F/500KN

U10F/1.25MN

3、 U10F/125KN force sensor product size

4、 U10F/125KN force sensor product parameters

5、 U10F/125KN force sensor product picture