1015-25kgLoad CellA product belonging to the Tedea brand in the United States, it is a single point weighing sensor made of aluminum material with a protection level of IP65 and an optional IP67. It is suitable for platform scales, counting scales, grocery scales, etc.
. Introduction to Tedea 1015-25kg Load Cell Products in the United States
Product Description:
Model 1015 is a single point weighing sensor designed for direct installation of low-cost, low capacity weighing platforms. Its use on large platforms, coupled with its high accuracy and low cost, makes this weighing sensor very suitable for various weighing applications, including platform scales and counting scales.
The special moisture-proof protective coating of the 1015 weighing sensor ensures long-term reliability. The built-in overload stop of model 1015 can provide mechanical overload protection. The other two induction lines provide feedback on the voltage reaching the weighing sensor. By inputting this voltage into an appropriate electronic device, it is possible to fully compensate for changes in lead resistance caused by temperature changes and/or cable extension.
The difference between the 1015 series and 1010 series is that 1015 is a balanced load cell and 1010 is a non balanced load cell (non balanced bridge)
Product series: 1015
Product Features
-Capacity 3-90 kg
-Aluminum structure
-Single point 400 x 400 mm platform
-NTEP approval (not applicable for 3 kg and 90 kg)
-IP65 protection level
-Can be used for metric and UNC threads
-Optional: FM approval available; IP67 available
Product Application
-Platform scale
-Counting balance
-Grocery scale
. Actual photo of the 1015-25kg weighing sensor at Tedea in the United States
. Tedea 1015-25kg weighing sensor related models in the United States
1015-3kg load cell
1015-5kg load cell
1015-7kg load cell
1015-10kg load cell
1015-15kg load cell
1015-25kg load cell
1015-30kg load cell
1015-50kg load cell
1015-90kg load cell
. Tedea 1015-25kg weighing sensor product dimensions in the United States
. Technical parameters of Tedea 1015-25kg weighing sensor products in the United States
. Safety instructions for Tedea 1015-25kg weighing sensor in the United States
1. The 1015 series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
4. The maximum load of the 1015-25kg weighing sensor is 25kg. When using it, attention should be paid to the possibility of instantaneous overload, which may also cause damage to the sensor.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ German HBM: Load cells - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series