DSR-11.3TLoad CellA product belonging to the Celtron brand in the United States, it is a single point weighing sensor made of chemically plated nickel alloy steel, with an optional stainless steel version. The protection level is IP67, suitable for weighing silos/hoppers/storage tanks.
. Introduction to the DSR-11.3T weighing sensor product from the United States
Product Description:
The dual end installation provides good constraints for the possible movement of the fuel tank, and in many cases, a check rod is not required. The design of shear beams provides excellent performance for high load-bearing loads. The output is rationalized to facilitate multi unit applications.
The DSR is made of alloy Tool steel and encapsulated in IP67, providing good moisture-proof and moisture-proof protection.
Product series: DSR
Product Features
-Capacity 1k – 75k pounds
-Design of shear beam with double end center load
-Output rationalization
-No horizontal movement
-Not sensitive to lateral loads
-Electroless Nickel Alloy Tool steel
-Optional: sealed, sealed; Stainless steel is available for selection; FM approval available
Product Application
-Silo/hopper/storage tank weighing
. Actual photo of the US Celtron DSR-11.3T weighing sensor
. American Celtron DSR-11.3T weighing sensor related models
DSR-1Klbs load cell
DSR-1.5Klbs load cell
DSR-2Klbs load cell
DSR-2.5Klbs load cell
DSR-3Klbs load cell
DSR-5Klbs (2.2t) load cell
DSR-10Klbs (4.5t) load cell
DSR-25Klbs (11.3t) load cell
DSR-50Klbs (22.7t) load cell
. Dimensions of DSR-11.3T weighing sensor products from the United States
. Technical parameters of the American Celtron DSR-11.3T weighing sensor product
. Safety instructions for the DSR-11.3T weighing sensor from the United States
1. The DSR series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
4. The maximum load of the DSR-11.3T weighing sensor is 11.3T. When using it, attention should be paid to the possibility of instantaneous overload, which may also cause damage to the sensor.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ German HBM: Load cells - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen