SBS-7.5tsLoad CellA product belonging to the Transcell brand in the United States, made of high-quality alloy steel with nickel plated anti-corrosion treatment on the surface. It has been certified by NTEP, CMC, and OIML, and has the advantages of high precision, high stability, easy installation, and speed. It is suitable for weighing scales such as platform scales, mixing plants, belt scales, and ingredient scales.
. Introduction to the American Transmission SBS-7.5ts Load Cell Product
Product series: SBS
Product features:
-High quality alloy steel material
-High precision
-High stability
-Certified through NTEP, CMC, OIML
-Easy and fast installation
-Surface nickel plating anti-corrosion treatment
-Suitable for platform scales, mixing plants, belt scales, and ingredient scales, etc
Optional range: 250lb, 250kg, 500kg, 1T, 1.5T, 2T, 2.5T, 5T, 7.5T, 10T
Wiring method:
Red:+Motivation
Black: - Motivation
Green:+signal
White: - Signal
. Image of the American Power Transmission SBS-7.5ts Load Cell
. Relevant models of the American Transcell SBS-7.5ts load cell
SBS-250LB Load Cell
SBS-250kg load cell
SBS-500kg weighing sensor
SBS-750kg load cell
SBS-1t load cell
SBS-1.5t load cell
SBS-2t load cell
SBS-2.5ts (small threaded hole) weighing sensor
SBS-2.5t (large threaded hole) weighing sensor
SBS-5t load cell
SBS-7.5ts (small threaded hole) load cell
SBS-7.5t (large threaded hole) weighing sensor
SBS-10t load cell
. Dimensions of the American Transmission SBS-7.5ts Load Cell Product
. Technical parameters of the American Transcell SBS-7.5ts weighing sensor
|
Rated Output |
Rated output |
3.0mV/V ± 0.1% |
|
Zero Balance |
Zero balance |
± 1% of rated output |
|
Creep after 30 minutes |
creep |
± 0.03% of rated output |
|
Nonlinearity |
Nonlinear |
± 0.03% of rated output |
|
Hysteresis |
lagging |
± 0.03% of rated output |
|
Repeatability |
Repeatability |
± 0.03% of rated output |
|
Temp, effect on output |
Sensitivity temperature drift |
≪ 0.002% of applied output/℃ |
|
Temp, effect on zero |
Zero temperature drift |
≪ 0.002% of rated output/℃ |
|
Safe Temp. Range |
Available temperature range |
-10 ℃ to+70 ℃ |
|
Temp. Compensated |
Temperature compensation range |
-10 ℃ to+40 ℃ |
|
Safe Overload |
Safe load |
150% |
|
Input Impedance |
Input impedance |
387 ohms ± 20 ohms |
|
Output Impedance |
Output impedance |
350 ohms ± 5 ohms |
|
Insulation Resistance |
Insulation impedance |
>5000 M ohm (50V DC) |
|
Rated Excitation |
Recommended excitation voltage |
10V DC/AC |
|
Maximum Excitation |
Maximum excitation voltage |
15V DC/AC |
|
Cable Length |
Wire length |
6m |
|
Cable Color Code |
Wire color |
Red( + E) Black(-E) Green( + S) White(-S) |
. Safety instructions for the American Transcell SBS-7.5ts load cell
1. The SBS series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
4. The load of the SBS-7.5ts weighing sensor is 7.5T. When using it, attention should be paid to the possibility of instantaneous overload, which may also cause damage to the sensor. A larger range can be chosen.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ German HBM: Load cells - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen