1、 Product Introduction
Product Series: AD101B
Product type: AD101B amplifier motherboard
Product Introduction
AD101B digital sensor electronic components belong to the AED device series, which can digitally condition signals from mechanical measurement sensors and connect them through bus capabilities.
This includes a digital amplifier motherboard, a basic box, and intelligent sensors with integrated signal processing. The task of these components is to directly digitize and adjust the measurement signal at the sensor location. Using digital sensors
Electronic devices, you can directly connect the S.G.1 sensor in the full bridge circuit to a computer or PC. This allows you to quickly configure a complete measurement chain with almost no additional work required.
The AD101B amplifier motherboard can operate independently of the AED9101B basic box. The basic box provides mechanical protection, shielding amplifier board (EMC protection), and offers you the opportunity to choose serial interfaces (RS232, RS485).
The signal processing functions of limit monitoring and rapid establishment of digital filters have opened up more application areas.
Product Features:
(1) Working voltage: 5V DC... 10V DC
(2) Stimulate the sensor through an external power source.
(3) Measure the input ohm full bridge
(4) Nominal sensitivity 2 mV/V
(5) RS232 serial interface
(6) Digital filtering and scaling of measurement signals
(7) Linear error correction
(8) Storage of safety parameters for power failure
(9) Non destructible storage of factory default values
(10) Selection of output speed for measured values
(11) All settings made through serial interface
(12) Automatic zero point tracking (0.5 d/s, 2%)
(13) Automatic initial zeroing (2%... 20%)
(14) Trigger function (liquid level trigger, external trigger)
(15) Two limit switches
2、 Product parameters
3、 Product images
Sales Engineer - Miss Chen