WTD11 weighing and transmission module can achieve remote parameter configuration in the American Zhongkesel ZXSCELL

1、 WTD11 Weighing Transmission Module Product Introduction

Product brand:Axel in the United States　ZXSCELL

Product series: WTD11

Product type: High precision weighing transmission module

Product Features:

(1) Remote parameter configuration and instrument status monitoring can be achieved through network device connection

(2) I/O port logic programmable (compatible with Mitsubishi PLC programming software)

(3) Stainless steel casing, compact size, strong industrial feel

(4) Rich configuration interfaces, multiple combinations of optional interfaces

(5) Standard configuration: RS485+RS485/RS232 (fixed)

(6) No weight calibration, editable startup logo, instrument I/O port testing and serial port testing functions

(7) Printing content is optional, and the header and footer information of the printed bill can be edited

(8) Suitable for lithium batteries, chemicals, feed, concrete mixing, asphalt mixing equipment, metallurgical blast furnaces and converters, etc

2、 Application of WTD11 weighing and transmission module function

1. RS-232 point-to-point serial communication

Continuous output or command output format

Provide fully compatible protocols for users to quickly upgrade

Support remote zeroing and tare weight operation

ESD anti-static interface protection

2. RS-485 multi-point serial communication

The baud rate can be selected between 2400 and 115200bps

Communication response time less than 5ms

As a slave station supporting data collection for the master station

Support MODBUS RTU slave protocol

3. Analog output interface

Supports multiple analog output formats, including 0~10V, 0~5V, 4~20mA, and 0~20mA.

16 bit analog output accuracy: 1/32767

Weight as analog output can be adjusted on the panel without the need for loading

4. Weighing and measuring

Weight display accuracy: 1/1000000.

Bluetooth communication, with rich interfaces and multiple combinations of interfaces.

No weight calibration, optional printing content.

Instrument I/O port testing and serial port testing functions.

The instrument can be connected to a mobile app to monitor status and configure parameters.

5. 10/100M Industrial Ethernet Interface

Connect to the upper PC or PLC through a switch

RJ-45 standard interface, including network status indication

Communication speed 10/100M, unlimited data from the slave station

Simple and easy-to-use TCP/UDP protocols and controls

Support dynamic/static network systems

6. Upper and lower limit alarm output

The keyboard can set upper and lower limit alarm values

Alarm point outputs through built-in relay dry contacts

Supporting replenishment function in tank weighing

Some models only support 3 alarm points

7. Pre set point mode quantitative weighing application

The keyboard can set up to 4 preset point values, while some models only support 3 preset points, depending on the hardware selection

The preset point value is output through the built-in relay dry contact

The preset point status is manifested as the comparison result between the preset value and the absolute value of the displayed value (gross weight or net weight)

8. Multi material serial quantitative weighing and batching, and networking

Support fixed value feeding or fixed value discharging control

The keyboard can preset four target weight values

The relay automatically controls the corresponding valve

Automatic correction of feeding accuracy

The input/output control interface function can be manually set

3、 Product picture of WTD11 weighing transmission module

4、 Technical parameters of WTD11 weighing transmission module