Liquid weighing and filling machine - Filling capacity 10-25L - Roller weighing platform

　10-25L liquid weighing and filling machine

The material is pumped to the inlet pipeline of the filling machine, and the frequency converter controls the flow rate of the pump. It is first fast and then slow, and filled by weighing. After filling, the filling nozzle does not drip. The main body of the machine is made of stainless steel material. Filling capacity of 10-25L. This model of machine can inject most high and low viscosity, particle free, non explosive liquids, and is widely used in industries such as lubricating oil, hydraulic oil, antifreeze, glass water, polyurethane, cosmetics, and daily chemical products.

Features: - Efficient, hygienic, and safe

1. Variable frequency speed regulation, three-stage fast filling (slow fast slow);

2. Fast filling speed, 2-5 barrels per minute. (According to the standard of 18L);

3. The roller weighing platform is equipped with a lid placement station, which can automatically configure an automatic capping machine (18-25L open plastic bucket) online;

4. After filling, there should be no dripping from the filling nozzle;

5. The manual screw of the filling head can be lifted and lowered to meet the needs of barrels of different heights;

6. Touch screen operation, simple and easy to understand, with parameter settings;

7. Safety: If the filling valve is not opened, the pump will not deliver material to prevent pipe burst;

8. Hygiene: The hollowed out area below the weighing platform is convenient for hygiene and cleanliness.

　Product technical parameters

Model: ZH-18A

Filling method: pump feeding/variable frequency three-stage speed/weighing filling

Pouring position: below the barrel mouth, above the liquid level for pouring

Infusion weight: 10-25L

Applicable barrel type: barrel height 200-420mm, barrel diameter less than 300mm, barrel mouth greater than 60mm

Display division: 0.1kg

Perfusion accuracy: ± 0.2%

Perfusion speed: 2-5 barrels per minute (according to the standard of 18L)

Pump type: 3-phase 380V, power not exceeding 2.2KW industrial pump (this quotation does not include pumps, frequency converter provides signal control for pump operation)

Anti drip method: vacuum suction device with high anti drip level

Scale table size: 300mm * 300mm roller

Perfusion nozzle diameter: outer diameter 45mm Perfusion nozzle

Feed pipe diameter: quick fitting leather pipe joint with an outer diameter of 25mm

Power supply: three-phase AC 380V 50Hz

Power: 2.2kw

Compressed air: 0.4~0.6MPa

Machine size: 800x800x1200mm

Machine weight: approximately 100 kilograms