PSD-SJTTLoad CellA product belonging to the Celtron brand in the United States, it is a spoke type weighing sensor made of aluminum alloy with a protection level of IP67. It has a low cross-section and compact design, suitable for use in experimental machines and various force measurements.
. Introduction to the PSD-SJTT weighing sensor product from the United States
Product Description:
-The PSD-SJTT sensor designed with a low cutting surface is a tension and compression dual purpose sensor specifically designed for experimental machines.
-The shapes of different ranges vary, please refer to the actual photo below
- PSD-SJTTIt can meet the requirements of different precision tests and can also be used for various force measurements.
-Optional PSD and PSD-SJTH series
Product series: PSD-SJTT
Product Features
-Range: 200kg -30t
-Compact design with low cross-section
-High output small deformation
-Alloy steel without electrolytic nickel plating (200kg aluminum alloy material)
-Eccentric loading compensation
application
-Experimental machine
-Force measurement
. Actual photo of the American Celtron PSD-SJTT weighing sensor
. Relevant models of PSD-SJTT weighing sensors from the United States
PSD-200KGSJTT weighing sensor
PSD-500KGSJTT weighing sensor
PSD-1TSJTT load cell
PSD-1.5TSJTT load cell
PSD-2.5TSJTT load cell
PSD-5TSJTT load cell
PSD-10TSJTT load cell
PSD-20TSJTT load cell
PSD-25TSJTT load cell
PSD-30TSJTT load cell
. Dimensions of PSD-SJTT weighing sensor products from the United States
. Technical parameters of the American Celtron PSD-SJTT weighing sensor| Parameters | value | unit |
| Rated range | 200kg, 500kg, 1t, 2t, 5t, 10t, 20t, 25t, 30t | |
| Recommended excitation voltage | 10VAC/DC | Vdc or Vac rms |
| Maximum excitation voltage | 15VAC/DC | Vdc or Vac rms |
| Rated output | 3mV/V ± 0.25% | mV/V |
| Nonlinear | 0.05% | ±% of rated output |
| Hysteresis | 0.05% | ±% of rated output |
| Non repeatability | 0.02% | ±% of rated output |
| Creep (20 minutes) | 0.03% | ±% of rated output |
| Zero point reply | 0.03% | ±% of rated output |
| Zero temperature compensation | 0.0015 | ±% of rated output/° C |
| Output temperature compensation | 0.0026 | ±% of applied load/° C |
| Temperature compensation range | -10 ℃ to+40 ℃ | ℃ |
| Operating temperature range | -20 ℃ to+60 ℃ | ℃ |
| Zero balance | ± 1% | ±% of rated output |
| Input impedance | 385 ± 5 Ω ⑴ | Ohms |
| Output impedance | 350 ± 3 Ω ⑵ | Ohms |
| Insulation impedance | ≫ 5000M Ω | Mega-Ohms |
| Safety overload | 150% | % of R.C. |
| Extreme overload | 300% | % of R.C. |
. PSD-SJTT Load Cell Safety Instructions
1. The PSD-SJTT series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ ZXSCELL in the United States: Load cells - SLZX, SLBH, SLBC, SBSE, LZXD, LZX13, LZX10, DZXL, BHxA and other series
★ ZXSCELL in the United States: Weighing instruments - ZM02, ZXM-P1, ZXM06, DZM-X1, DZM-MINI, DZX7702X and other series
★ ZXSCELL in the United States: Weighing modules - SWB MK, UW MK, CW MK, SBT MK, SBS ME and other series
★ German HBM: Load cells - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen