PSDLoad CellA product belonging to the Celtron brand in the United States, it is a spoke type weighing sensor made of chemically plated nickel alloy steel with a protection level of IP67. It has a low cross-section and compact design, suitable for testing machines, platform scales, hoppers, truck scales, and container weighing.
. Introduction to the PSD weighing sensor products of the American Celtron brand
Product Description:
A lightweight design that makes PSD the most suitable application for critical heights for safety reasons. Even if lateral forces are unavoidable during normal operation, the shear web design can provide excellent performance. A typical example of lateral force resistance is its application in car scales.
PSD is made of alloy steel and fully encapsulated with a special compound that meets IP67 to protect the battery from water and moisture erosion.
Product series: PSD
Product Features
-Capacity: 2.5T, 5T, 10T, and 25T
-Compact design with low cross-section
-Low deflection, high output
-Chemical nickel plated alloy steel structure
-Eccentric load compensation
-The entire series has obtained OIML C3 certification
-Optional: PSD-SJTT and PSD-SJTH with different loading holes
application
-Testing machine
-Platform scale
-Hopper and container weighing
-Automobile scale
. Actual photo of the PSD weighing sensor from the United States
. Relevant models of the PSD weighing sensor from the United States
PSD-2.5T load cell
PSD-5T load cell
PSD-10T load cell
PSD-25T load cell
. Product dimensions of the American Celtron PSD weighing sensor
. Technical parameters of the American Celtron PSD weighing sensor
| Parameters | 0 | 1 | unit |
| NTEP/OIML accuracy level | C3 | Non-Approved | |
| Maximum number of divisions (n) | 3000 | 1000 | |
| Ya=Emax/Vmin | 8000 | 5000 | Maximum available |
| Rated range (Emax) | 2500, 5000, 10000, 25000 | kg |
| Rated output | 3.0 | mV/V |
| Rated output error | 0.25 | ±% of rated output |
| Zero balance | 1 | ±% of rated output |
| Nonlinear | 0.025 | ±% of rated output |
| Hysteresis | 0.025 | ±% of rated output |
| Non repeatability | 0.020 | ±% of rated output |
| Creep (20 minutes) | 0.030 | ±% of rated output |
| Zero point response (20 minutes) | 0.030 | ±% of rated output |
| Zero temperature influence coefficient | 0.0017 | 0.0026 | ±% of rated output/℃ |
| Sensitivity temperature influence coefficient | 0.0010 | 0.0015 | ±% of applied load/℃ |
| Temperature compensation range | -10 to +40 | ℃ |
| Operating temperature range | -20 to +60 | ℃ |
| Safety overload | 150 | % of R.C. |
| Extreme overload | 300 | % of R.C. |
| Recommended excitation voltage | 10 | Vdc or Vac rms |
| Maximum excitation voltage | 15 | Vdc or Vac rms |
| Input impedance | 385 ± 5 | n |
| Output impedance | 350 ± 3 | Q |
| Insulation impedance | >5000 | MQ |
| Material | Alloy steel silver plating | |
| Protection level | IP67 | |
. Safety instructions for the American Celtron PSD weighing sensor
1. The PSD series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ ZXSCELL in the United States: Load cells - SLZX, SLBH, SLBC, SBSE, LZXD, LZX13, LZX10, DZXL, BHxA and other series
★ ZXSCELL in the United States: Weighing instruments - ZM02, ZXM-P1, ZXM06, DZM-X1, DZM-MINI, DZX7702X and other series
★ ZXSCELL in the United States: Weighing modules - SWB MK, UW MK, CW MK, SBT MK, SBS ME and other series
★ German HBM: Load cells - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen