[AH sensor] AH-5kg~AH-100kg_ Italian NBC Elettronica load cell

　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　

Guangzhou Zhongxin Automation Technology Co., Ltd. specializes in supplying NBC-AH sensors ranging from NBC-AH-5kg to NBC-AH-100kg_ Italian NBCLoad Cell, [AH sensor] AH-5kg~AH-100kg_Italian NBC Elettronica load cellEnsure fast delivery time, 100% original import, and improve complete automated weighing solutions for various industrial fields. The range of NBC weighing sensors in Italy: NBC-AH-5kg, NBC-AH-10kg, NBC-AH-15kg, NBC-AH-25kg, NBC-AH-30kg, NBC-AH-50kg, NBC-AH-75kg, NBC-AH-100kg.

NBC Elettronica from Italy is one of our company's key competitive products, with absolute competitive prices. It is available in stock, original, authentic, and reliable! Ensure satisfactory price and quality! We solemnly promise: "If you are not satisfied within three months, you can return or exchange the goods unconditionally at any time, refund the full payment, and do not charge any fees. Two year warranty and free maintenance at any time!

Product features:
Single point weighing sensor
Range: 5, 10, 15, 20, 25, 30, 50, 75100kg
Size (mm): 400 * 400
Material: Aluminum
Accuracy level: C3-C4
Protection level: IP65
ATEX　Class：II/22D

Technical parameters:


Product size:



　
Extended Reading

Weighing Module Installation instructions
Mechanical installation　
If necessary, shims can be used to adjust to evenly apply force to each sensor.
The top and bottom plates of the weighing module must be adjusted in a straight line to maintain the vertical direction of the force acting on the sensor.
When welding near the weighing module, it is important to pay attention to grounding, otherwise the welding current may pass through the sensor and cause damage.
The foundation requires level and good rigidity, and there is a small difference in the required level between each foundation.
Be sure to tighten the support bolts of the weighing module during installation.
The weighing module must be installed in a convenient place for maintenance.
　Connection
All wiring should use shielded insulated cables.
Electromagnetic interference can affect the output signal of the sensor, causing errors in weighing.
Isolate the power cord and sensor cable.
The junction box should be protected from moisture and corrosive substances.
Cables can be sleeved to prevent mechanical damage or erosion by damp or corrosive substances.
Do not arbitrarily change the length of the sensor cable, as this will change the output impedance of the sensor.
It is recommended to choose the recommended length and size of the connecting cable between the junction box and the weighing instrument, otherwise it may cause signal loss.
　Preparation before calibration　
Install a bracket on the tank body for hanging weights. The spacing between each bracket should be equal.
Before calibration, the output signal of each sensor should be tested to determine whether the force is evenly distributed to each sensor.
If necessary, shims can be used to adjust the level of the module or adjust the potentiometer of the junction box to maintain consistent output for each sensor.
　
The above are [AH sensors] AH-5kg~AH-100kg_ The detailed information of the Italian NBC Elettronica weighing sensor, if you are interested in [AH sensor] AH-5kg~AH-100kg_ If you have any questions about the price, delivery time, model, and inventory of NBC Elettronica weighing sensors in Italy, please feel free to call18520271262 Chen GongObtain [AH sensor] AH-5kg~AH-100kg_ Latest price details for NBC Elettronica load cells in Italy.