TCEAMP sensor: TCEAMP-350kg~TCEAMP-20T_ Italian AEP weighing sensor

　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　
Guangzhou Zhongxin Automation Technology Co., Ltd. specializes in supplying TCEAMP sensors ranging from TCEAMP-350kg to TCEAMP-20T_Italian AEP weighing sensor，Italian AEPThe series guarantees fast delivery time and 100% original imports, providing a complete automated weighing solution for various industrial fields. Italian AEP weighing sensor range: TCEAMP-350kg, TCEAMP-500kg, TCEAMP-1t, TCEAMP-2.5t, TCEAMP-5t, TCEAMP-7.5t, TCEAMP-10t, TCEAMP-20t. Italian AEP isOne of our company's key competitive products, with absolute competitive prices, in stock, original, authentic, and reliable! Ensure satisfactory price and quality! We solemnly promise: "If you are not satisfied within three months, you can return or exchange the goods unconditionally at any time, refund the full payment, and do not charge any fees.". Two years warranty, free maintenance at any time!

Product features：
Alloy structural steel, with a simple structure, reliable operation, convenient installation, easy use, high accuracy, and good interchangeability. The Italian AEP weighing sensor TCEAMP-500kg is applied in industrial process control and ingredient control systems, with small volume, high stability, and high accuracy; Durable and sturdy, with high-speed dynamic response and strong overload resistance; One important point to emphasize when installing on the bottom is the protruding point at the top.
　
　
Technical parameters:



Product size:



　
Expand reading

Weighing ModuleInstallation instructions
Mechanical installation　
If necessary, shims can be used to adjust the force evenly on each sensor.
The top and bottom plates of the weighing module must be adjusted in a straight line to maintain the vertical direction of the force acting on the sensor.
When welding near the weighing module, be sure to pay attention to grounding, otherwise the welding current will pass through the sensor and cause damage.
The basic requirements are horizontal and have good rigidity, and there is a small difference in the required levelness between the foundations.
Be sure to tighten the support bolts of the weighing module during installation.
The weighing module must be installed in a convenient maintenance location.
　Connection
All connections should use shielded insulated cables.
Electromagnetic interference can affect the output signal of sensors, causing weighing errors.
Isolate the power cord and sensor cable.
The junction box should be protected from moisture and corrosive substances.
Cables can be fitted with sleeves to prevent mechanical damage or erosion by damp or corrosive substances.
Do not arbitrarily change the length of the sensor cable, as this will change the output impedance of the sensor.
It is recommended to choose the recommended length and size of the connecting cable between the junction box and the weighing instrument, otherwise it may cause signal loss.
　Preparation work before calibration　
Install brackets on the tank body for hanging weights. The spacing between each bracket should be equal.
Before calibration, the output signal of each sensor should be tested to determine whether the force is evenly distributed to each sensor.
If necessary, the level of the module can be adjusted with a gasket or the potentiometer of the junction box can be adjusted to maintain consistent output for each sensor.
　
The above is the TCEAMP sensor TCEAMP-350kg~TCEAMP-20T_ Detailed information on Italian AEP weighing sensors, if you are interested in [TCEAMP sensor] TCEAMP-350kg~TCEAMP-20T_ If you have any questions about the price, delivery time, model, or inventory of AEP weighing sensors in Italy, please feel free to call us18520271262 Chen GongObtain TCEAMP sensor TCEAMP-350kg~TCEAMP-20T_ Italian AEPWeighing sensorLatest price details for.