Testing Machine - Zhongxin is a first-class company in the field of industrial weighing and ingredients

The testing machine is an instrument to verify the quality or performance. It is a precision testing instrument to measure the mechanical performance, process performance, internal defects of metal materials, non-metallic materials, Machine element, engineering structures, etc. under various conditions and environments, and to verify the dynamic imbalance of rotating parts. Deformation detectors can be divided into two categories: 1. Metal material testing machines (tensile testing machines, pressure testing machines, universal testing machines, torsion testing machines, creep testing machines, endurance strength testing machines, relaxation testing machines, impact testing machines, and fatigue testing machines); The second non-metallic material testing machine (plastic material testing machine, rubber material testing machine, cement rock concrete testing machine, wood testing machine, refractory material testing machine, paper testing machine, paint coating testing machine, enameled wire and cable testing machine, adhesive testing machine, ceramic testing machine, interface tension testing machine, leather testing machine, fruit testing machine, broken tile testing machine, fiber testing machine, etc.)< a>

Operating steps of the testing machine

1. Start up: After confirming that the power and signal connections of the equipment are correct, start up in the following order: testing machine → computer → printer. Wear gloves, check if the machine is powered on, leaking electricity, and connected to the power before testing. Press the power switch, the power indicator light will light up, and the machine testing program will automatically open< a>

2. Install the fixture and select the fixture according to the sample situation. If the fixture has been installed on the testing machine, check the fixture and set a limit device based on the length of the sample and the spacing between the fixtures< a>

3. Click on the new test in the test section, select the corresponding test plan, and input the original user parameters of the sample (such as size, thickness, etc.)< a>

4. Select specimens from the same batch, with no less than 4 sets of specimens; Determine the width, gauge distance, and pulling speed of the sample based on its specific situation. To clamp the sample, first clamp the sample onto the clamp near one end of the force sensor, clear the force to eliminate the weight of the sample, and then clamp the other end of the sample< a>

5. Confirm whether the protective devices for the rise and fall of the machine fixture are effective; Click the run command button, and the device will conduct the test according to the test plan set by the software< a> 6. After each sample is tested, the test results will be displayed on the right end of the screen. Clicking the 'Generate Report' button again will generate the test report< a>

7. Shutdown: After completing the test work, the operation should be carried out in the following order: testing machine → printer → computer< a>

To purchase testing machine accessories - tension and pressure weighing sensors, please contact us at Guangzhou Zhongxin