1、 Introduction to K-C9C-00K5-03M0-VA1-S Force Sensor
The German HBM brand C9C force sensor is used for measuring compressive force, with an accuracy level of 0.2 and a nominal (rated) force of 50N to 50KN. It has high rigidity and is particularly suitable for dynamic measurement tasks.
The K-C9C-00K5-03M0-VA1-S model force sensor is available in stock.
Product brand: HBM Germany
Product series: C9C series force sensor
Product model: K-C9C-00K5-03M0-VA1-S
Product range: 0.5KN
Product Features:
(1) Compact design compression force sensor
(2) Accuracy level 0.2
(3) Nominal (rated) force 50N to 50KN, optional 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 50KN
(4) Different cable lengths, plug components, and TED can be configured according to requirements
(5) Made of non rusting materials
(6) High rigidity, especially suitable for dynamic measurement tasks
2、 German HBM brand K-C9C-00K5-03M0-VA1-S force sensor real-life photo
3、 German HBM brand K-C9C-00K5-03M0-VA1-S force sensor product parameters
4、 Product dimensions of HBM K-C9C-00K5-03M0-VA1-S force sensor from Germany
5、 The range of the German HBM C9C force sensor series is as follows:
C9C/50N force sensor
C9C/100N force sensor
C9C/200N force sensor
C9C/500N force sensor
C9C/1KN force sensor
C9C/2KN force sensor
C9C/5KN force sensor
C9C/10KN force sensor
C9C/20KN force sensor
C9C/50KN force sensor
6、 German HBM C9C/50N Force Sensor Safety Instructions
intended use
To ensure safe operation, always follow the regulations in the installation and operation instructions, as well as the data specified in safety rules, regulations, and technical data sheets. It is also necessary to comply with the applicable laws and safety regulations of the relevant applications.
The force sensor is not intended to be used as a safety component. The correct and safe operation of force sensors requires proper transportation, storage, installation, and careful handling.
operator
The installation and operation of force sensors must be carried out by fully qualified personnel. Qualified personnel in this regard refer to personnel commissioned to install, install, start, and operate products, who are familiar with the operation of force sensors and have corresponding functional qualifications.
Load bearing capacity limit
When using force sensors, it is necessary to follow the information in the technical data sheet. Especially not exceeding the maximum load specified by each party.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure brand new, original and authentic products at competitive prices. Welcome new and old customers to inquire!
★ German HBM:load cell-- Z6F,C16A,RTN,HLCB1, PW2D, PW6D,PW2C,PW6K，PW6C,PW10A,PW12C,PW16A,PW22,S40A,C2 Waiting series ★ German HBM: Digital sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/Force Sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ Celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB and other series
★ Tedea shantleigh from the United States: - Series 341061635510151041022126041240, etc
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: Weighing Sensor-- TSC，TSB，MTB，GD，SLB415，SLB215，MT1022，MT1260，MT1241，SB，SBS，SBH Waiting series
★ METTLER TOLEDO: Digital Sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: Control Instruments - IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen