Introduction to German HBM S9M/2KN Force Sensor
The German HBM S9M/2KN force sensor is used for measuring tensile and compressive forces and is widely used in various static and dynamic measurement applications. It is plug and play, saving time and eliminating the need for on-site welding or plug assembly.
Guangzhou Zhongxin Automation Technology Co., Ltd. sells the full range of German HBM S9M force sensors, ensuring that the force sensors are original and authentic, with quality assurance. We can provide free technical support and complete after-sales service. The price is reasonable. For specific prices, please call us at 18520271262 and we will give you the most affordable quotation.
Product series: S9M series force sensor
Product Features:
-Accuracy level: 0.02
-Range: 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 50KN
-High precision and sturdy reliability
-Material: Stainless steel material, laser welded seal
-The temperature dependence of zero point is very low, with a tight seal
-The influence of parasitic torque and force on measurement results is very small
Actual photo of German HBM S9M/2KN force sensor
German HBM S9M/2KN force sensor product parameters
German HBM S9M/2KN force sensor product dimensions
The HBM S9M force sensor series from Germany has the following ranges:
S9M/500N force sensor
S9M/1KN force sensor
S9M/2KN force sensor
S9M/5KN force sensor
S9M/10KN force sensor
S9M/20KN force sensor
S9M/50KN force sensor
German HBM S9M/2KN force sensor safety instructions
intended use
The S9M force sensor is specifically designed to measure static and dynamic tensile and/or compressive forces within the load limit range specified in various load limit specifications. Any other use is not the intended use.
To ensure safe operation, always follow the regulations in the installation and operation instructions, as well as the data specified in safety rules, regulations, and technical data sheets. It is also necessary to comply with the applicable laws and safety regulations of the relevant applications.
The force sensor is not intended to be used as a safety component. The correct and safe operation of force sensors requires proper transportation, storage, installation, and careful handling.
operator
The installation and operation of force sensors must be carried out by fully qualified personnel. Qualified personnel in this regard refer to personnel commissioned to install, install, start, and operate products, who are familiar with the operation of force sensors and have corresponding functional qualifications.
Load bearing capacity limit
When using force sensors, it is necessary to follow the information in the technical data sheet. Especially not exceeding the maximum load specified by each party.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure brand new, original and authentic products at competitive prices. Welcome new and old customers to inquire!
★ German HBM:load cell-- Z6F,C16A,RTN,HLCB1, PW2D, PW6D,PW2C,PW6K，PW6C,PW10A,PW12C,PW16A,PW22,S40A,C2 Waiting series
★ German HBM: Digital sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/Force Sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ Celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB and other series
★ Tedea shantleigh from the United States: - Series 341061635510151041022126041240, etc
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: Weighing Sensor-- TSC，TSB，MTB，GD，SLB415，SLB215，MT1022，MT1260，MT1241，SB，SBS，SBH Waiting series
★ METTLER TOLEDO: Digital Sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: Control Instruments - IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen