1、 German HBM brand U2B/50KNIntroduction to force sensors
The U2B force sensor is suitable for measuring forces in the direction of tension and compression, and can perform static or dynamic measurements while maintaining high accuracy. The U2B force sensor is made of stainless steel material. Suitable for use under harsh conditions. U2B sensors are maintenance free, so they can be installed in hard to reach places, and measurement signals can be transmitted to other remote measurement devices.
Guangzhou Zhongxin Automation Technology Co., Ltd. sells the full range of German HBM brand U2B force sensors, ensuring that the force sensors are original and authentic, with quality assurance. We can provide free technical support and comprehensive after-sales service. The prices are reasonable, and please feel free to contact us by phone for specific prices. We will give you the most affordable quotation.
Product brand: HBM Germany,German HBM force sensor
Product type:force sensor
Product series: 1-U2B series force sensor
Product Features:
(1) Stainless steel force sensor
(2) Pull/compression force sensor
(3) High precision, built-in overload protection
(4) Sturdy and capable of withstanding dynamic loads
(5) Height low - axial displacement<0.1mm
(6) Can still be safely used in harsh environments
(7) Range options: 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 50KN, 100KN, 200KN
2、 German HBM brand U2B force sensor series with full range
U2B/500N force sensor
U2B/1KN force sensor
U2B/2KN force sensor
U2B/5KN force sensor
U2B/10KN force sensor
U2B/20KN force sensor
U2B/50KN force sensor
U2B/100KN force sensor
U2B/200KN force sensor
3、 German HBM brand U2B/50KNDimensions of force sensor products
4、 German HBM brand U2B/50KNProduct parameters of force sensor
5、 Actual photo of German HBM brand U2B force sensor
6、 U2B Force Sensor Safety Instructions
1. Expected use
To ensure safe operation, always follow the regulations in the installation and operation instructions, as well as the data specified in safety rules, regulations, and technical data sheets. It is also necessary to comply with the applicable laws and safety regulations of the relevant applications.
The force sensor is not intended to be used as a safety component. The correct and safe operation of force sensors requires proper transportation, storage, installation, and careful handling.
2. Operator
The installation and operation of force sensors must be carried out by fully qualified personnel. Qualified personnel in this regard refer to personnel commissioned to install, install, start, and operate products, who are familiar with the operation of force sensors and have corresponding functional qualifications.
3. Load bearing capacity limit
When using force sensors, it is necessary to follow the information in the technical data sheet. Especially not exceeding the maximum load specified by each party.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure brand new, original and authentic products at competitive prices. Welcome new and old customers to inquire!
★ German HBM: Weighing sensors - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/Force Sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ Celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB and other series
★ Tedea shantleigh from the United States: - Series 341061635510151041022126041240, etc
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: Weighing Sensor-- TSC，TSB，MTB，GD，SLB415，SLB215，MT1022，MT1260，MT1241，SB，SBS，SBH Waiting series
★ METTLER TOLEDO: Digital Sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: Control Instruments - IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen