AD103C amplifier motherboard German HBM DC amplifier board suitable for static and dynamic applications

1、 AD103C amplifier motherboard product introduction

Product brand:German HBM

Product Series: AD103C

Product type: Amplifier motherboard

Product function: DC amplifier board suitable for static and dynamic applications

Product Introduction

(1) AD103C digital sensor electronic components belong to the AED device series, which can digitally condition signals from mechanical measurement sensors and connect them through bus capabilities.

(2) This includes digital amplifier boards, basic components, and intelligent sensors with integrated signal processing. The task of these components is to directly digitize and adjust the measurement signal at the sensor location. By using digital sensor electronics, you can directly connect the strain gauge (SG) sensor in the full bridge circuit to the controller or PC. This allows you to quickly configure a complete measurement chain with almost no additional work required.

(3) The AD103C amplifier board can operate independently of the basic components.

(4) AED basic components provide mechanical protection, shielding AD103C amplifier board (EMC protection), and allow you to choose other interfaces in addition to RS232 serial interface, such as RS485 (4-wire), Profibus, CANOpen, and DeviceNet.

(5) The signal conditioning functions of limit monitoring, extreme value storage, and rapid establishment of digital filters have opened the door to more application areas. In addition, AD103C enables you to control the filling and batching process.

(6) The free PanelX PC software makes it easy to set all parameters, display dynamic measurement signals, and conduct comprehensive analysis of dynamic systems.

(7) The AD103C command is compatible with the AD103B amplifier. Calibration functions (CAL, ACL commands) are no longer required to ensure the accuracy of AD103C.

(8) However, these commands are still executed to ensure software compatibility. AD103C no longer needs to interrupt measurements to ensure measurement accuracy.

Product Features:

(1) DC amplifier for resistance sensors

(2) For static and dynamic applications

(3) Connect directly to the computer through the RS-232 interface

(4) According to the 10000 d Level 3 Test Report provided by OIML

(5) High transmission rate and resolution

(6) User set storage

(7) Command set for filling and ingredient functions

(8) Diagnostic interface for analysis and additional instructions

2、 AD103C amplifier motherboard product parameters

3、 AD103C amplifier motherboard product picture