1、 KDH-5-100KN Weighing Module Product Introduction
Product Series: KDH-5
Product type: Weighing module
Product range: 100KN
Product Introduction
(1) The KDH-5 weighing module combines high precision with a compact and sturdy mechanical device.
(2) The sensing element consists of three parts. Two external components are supported and placed on an internal block fixed on the base. On the middle part as a load sensing component, there is a yoke to which the legs of the fuel tank or similar object are fixed. The sensor is effectively locked, so it will not twist in the built-in module.
(3) The design of KDH-5 is insensitive to lateral loads, and the module design makes it easy to remove the weighing sensor during the assembly process of the container to be weighed, such as during virtual installation.
Product Features:
(1) Easy to install
(2) No additional installation details required
(3) Movable load point
(4) Compact and sturdy
(5) Allow movement caused by thermal expansion
(6) FM, ATEX, and IECEx certifications are applicable to hazardous locations
(7) According to the requirements, execution level Exc 2 that complies with EN1090 standards can be provided
Product Application:
(1) Process weighing
(2) Liquid level monitoring
2、 KDH-5 weighing module related range
KDH-5-20KN
KDH-5-50KN
KDH-5-100KN
KDH-5-200KN
KDH-5-300KN
KDH-5-400KN
KDH-5-500KN
KDH-5-1000KN
KDH-5-2000KN
3、 Technical parameters of KDH-5-100KN weighing module
4、 KDH-5-100KN weighing module product size
5、 Product image of KDH-5-100KN weighing module
Sales Engineer - Miss Chen