122Weighing sensorA product belonging to the Viday Tedea brand in the United States, with a standard stainless steel shell material, compact and economical column design, 6-wire (sensing) circuit, sealed to IP68, very suitable for multi unit applications, suitable for truck weighbridges, hoppers, and tank weighing.
1、 Introduction to Tedia 122 Weighing Sensor Products in the United States
Product Description:
-The Type 122 is a heavy-duty universal compression type weighing sensor, particularly suitable for weighing hoppers and storage tanks, as well as many other large industrial applications, including weighing scales for trucks.
-The simple and compact column design and sturdy sealing structure of the 122 type weighing sensor ensure its long-term service life in all types of on-site installations.
-The 122 type weighing sensor is usually used for multi sensor installation, so its standard output tolerance is within 0.1%.
-The other two induction lines provide feedback on the voltage reaching the weighing sensor. By inputting this voltage into an appropriate electronic device, it is possible to fully compensate for changes in lead resistance caused by temperature changes and/or cable extension.
Product Series: 122
Product features:
-Capacity 50-150 tons
-Very suitable for multi unit applications
-Compact and economical column design
-Sealed to IP68
-6-wire (sensing) circuit
-Standard stainless steel casing
-Optional range: 50t, 100t, 150t
2、 Actual photo of Tedia 122 weighing sensor in the United States
3、 Tedia 122 weighing sensor related models in the United States
122-50T weighing sensor
122-100T weighing sensor
122-150T weighing sensor
4、 Dimensions of Tedia 122 weighing sensor products in the United States
5、 Technical parameters of the American Tedia 122 weighing sensor
| SPECIFICATIONS |
| PARAMETER | VALUE | UNIT |
| Rated capacity—R.C. (Emax) | 50 | 100 | 150 | t |
| NTEP/OIML accuracy class | Non-Approved¹ | |
| Maximum no. of intervals (n) | 2000 | |
| Y = Em„/Vmin | 2000 | |
| Rated output—R.O. | 1.5 | 2 | mV/V |
| Rated output tolerance | 0.0015 | ±mV/V |
| Zero balance | 0.015 | 0.02 | ±mV/V |
| Zero return, 30 min. | 0.030 | ±% of applied load |
| Total error (per OIML R60) | 0.030 | ±% of rated output |
| Temperature effect on zero | 0.03 | ±% of rated output/℃ |
| Temperature effect on output, unbalanced | 0.008² | ±% of load/℃ |
| Temperature range, compensated | 5 to +45 | ℃ |
| Temperature range, safe | -20 to +60 | ℃ |
| Maximum safe central overload | 150 | % of R.C. |
| Ultimate central overload | 200 | % of R.C. |
| Excitation, recommended | 10 | VDC or VAC RMS |
| Excitation, maximum | 15 | VDC or VAC RMS |
| Input impedance | 670±15 | 1270±20 | 1350±30 | Q |
| Output impedance | 600±5 | 1205±5 | 1205±5 | Q |
| Insulation resistance | >2000 | MO |
| Cable length | 15 | m |
| Cable type | 6 wire, braided, PVC, single floating screen | Standard |
| Construction | Stainless steel housing, plated alloy steel sensor | |
| Environmental protection | IP68 | |
(1) Typical 80% utilization
(2) Balanced span compensation is available upon request
All specifications subject to change without notice.
6、 Safety instructions for the Tedia 122 weighing sensor in the United States
1. The 122 series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure brand new and authentic products with excellent prices. Welcome new and old customers to inquire!
★ Axel in the United States: Load cells - SLZX, SLBH, SLBC, SBSE, LZXD, LZX13, LZX10, DZXL, BHxA and other series
★ Kessel in the United States: Weighing instruments - ZM02, ZXM-P1, ZXM06, DZM-X1, DZM-MINI, DZX7702X and other series
★ Kessel in the United States: Weighing modules - SWB MK, UW MK, CW MK, SBT MK, SBS ME and other series
★ German HBM: Load Cells - Series Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2, etc
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Shiquan Celltron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell from the United States: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: Weighing sensors - TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital sensors - GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: Control instruments - IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen