【 ASB sensor 】 ASB-125Kg~ASB-1t_ New Zealand PT LTD Load Cell

　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　

Guangzhou Zhongxin Automation Technology Co., Ltd. specializes in supplying ASB sensors ranging from ASB-125Kg to ASB-1t_New Zealand PT LTD Load CellNew Zealand ASB-500KgLoad CellEnsure fast delivery time, 100% genuine products, and strive to become the top brand for sensor sales in China. New Zealand ASB-500Kg weighing sensor related models: AST-125kg, AST-250kg, AST-500kg, AST-1000kg.New ZealandASB-500KgLoad CellyesOne of our company's key competitive products, with absolute competitive prices, in stock, original, authentic, and reliable! Ensure satisfactory price and quality!We solemnly promise: "Within three months, if there are any quality issues, we will unconditionally return or exchange the goods, refund the full payment, and do not charge any fees. 1 year warranty, ready for repair!
　
Product Introduction:
Cantilever beam type weighing sensor
3-year warranty
Protection level: IP67
Select aluminum alloy material
Range options: 125kg, 250kg, 500kg, 1000kg
Applied to platform scales, hopper scales, silo scales, tank scales, etc
　
Product technical parameters:



Product structural dimensions:


　
Extended Reading

Weighing Module Installation instructions
　Mechanical installation　
If necessary, shims can be used to adjust to evenly apply force to each sensor.
The top and bottom plates of the weighing module must be adjusted in a straight line to maintain the vertical direction of the force acting on the sensor.
When welding near the weighing module, it is important to pay attention to grounding, otherwise the welding current may pass through the sensor and cause damage.
The foundation requires level and good rigidity, and there is a small difference in the required level between each foundation.
Be sure to tighten the support bolts of the weighing module during installation.
The weighing module must be installed in a convenient place for maintenance.
　Connection
All wiring should use shielded insulated cables.
Electromagnetic interference can affect the output signal of the sensor, causing errors in weighing.
Isolate the power cord and sensor cable.
The junction box should be protected from moisture and corrosive substances.
Cables can be sleeved to prevent mechanical damage or erosion by damp or corrosive substances.
Do not arbitrarily change the length of the sensor cable, as this will change the output impedance of the sensor.
It is recommended to choose the recommended length and size of the connecting cable between the junction box and the weighing instrument, otherwise it may cause signal loss.
　Preparation before calibration　
Install a bracket on the tank body for hanging weights. The spacing between each bracket should be equal.
Before calibration, the output signal of each sensor should be tested to determine whether the force is evenly distributed to each sensor.
If necessary, shims can be used to adjust the level of the module or adjust the potentiometer of the junction box to maintain consistent output for each sensor.
　

The above is [ASB sensor] ASB-125Kg~ASB-1t_ New Zealand PT LTD load cell details, if you are interested in [ASB sensor] ASB-125Kg~ASB-1t_ If you have any questions about the price, delivery time, model, and inventory of PT LTD weighing sensors in New Zealand, please feel free to call18520271262 Chen GongObtain [ASB Sensor] ASB-125Kg~ASB-1t_ Latest price details for PT LTD load cells in New Zealand.