LCH-5kN to LCH-500kN sensor [Japanese NTS]_ Japanese NTS weighing sensor

　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　

【Guangzhou Zhongxin Automation Technology Co., Ltd】Professional supply of Japanese NTS_ LCH series load cells, (LCH seriesJapanese NTS weighing sensor）Ensure fast delivery time, 100% genuine products, and strive to become the top brand for sensor sales in China. Related models of Japanese NTS LCH series weighing sensors: LCH-5kN, LCH-10kN, LCH-20kN, LCH-30kN, LCH-50kN, LCH-100kN, LCH-200kN, LCH-300kN, LCH-500kN

Introduction to Japanese NTS LCH Series Products

Product brand: Japanese NTS weighing sensor
Product characteristics:Columnar typeLoad Cell
Stainless steel material, automatic alignment
Certified as OIML (25 to 50 tons)
Built-in overload protection
RS485/RS422 2-wire, half duplex
Built in overload detection
Welding seal, IP66/IP68/IP69K
Optional range: 5kN~500kN
Application scope: Large platform scales, truck scales, and track scales

Complete model of the Japanese NTS LCH series

model	rated
LCH-5 kN	5kN	509.9kgf
LCH-10N	10kN	1. 019tonf
LCH-20 kN	20 kN	2.039t
LCH-30 kN	30 kN	3.059t
LCH-50 kN	50 kN	5.099 tonf
LCH-100 kN	100 kN	10.19 tonf
LCH-200 kN	200 kN	20.39 tonf
LCH-300 kN	300 kN	30.59 tonf
LCH-500 kN	500 kN	50.99t

Note: This is a weighing sensor developed specifically for stamping, pressing, and rated pressure presses ranging from 5kN to 500kN. There are four installation holes on the two end faces, and the punch and die are installed through flange connection. It is easy to install small press machines on existing ones, and they are widely used for qualified/unqualified judgment of stamping products, certain stroke, load management during pressing, etc.

Installation dimensions of the Japanese NTS LCH series

Complete model of the Japanese NTS LCH series
Japanese NTS LCH-5kN load cell with a capacity of 5kN
Japanese NTS LCH-10kN load cell with a capacity of 10 kN
Japanese NTS LCH-20kN load cell with a capacity of 20 kN
Japanese NTS LCH-30kN load cell with a capacity of 30 kN
Japanese NTS LCH-50kN load cell with a capacity of 50 kN
Japanese NTS LCH-100kN load cell with a capacity of 100 kN
Japanese NTS LCH-200kN load cell with a capacity of 200 kN
Japanese NTS LCH-300kN load cell with a capacity of 300 kN
Japanese NTS LCH-500kN load cell with a capacity of 500 kN
　
　
Extended Reading

Performance indicators of weighing sensors
The performance of a weighing system can be measured by indicators such as linearity, hysteresis, repeatability, and creep.
Linear:Indicates the consistency between the actual output of the system and the theoretical straight line. As shown in the figure, when linear errors occur, the output of the system is correct at no load and full load, but the input-output points between these two points are inconsistent with the ideal state. Linear error is the maximum difference between the theoretical straight line and the actual output curve.
Lag:Indicates the degree to which the input-output curve of the system does not coincide during loading and unloading.
Repeatability:Indicates the degree of inconsistency in the system's output for several consecutive weighing of the same weight during the loading or unloading process. Usually expressed as the percentage of the total output that is the difference between the minimum output and the maximum output of the system under the same loading condition.
Creep:The characteristic of a system that bears a constant weight at a certain temperature, and the output changes over time due to the mechanical deformation of the elastic material of the sensor.
　
Overview of Column Load Cells
The column type weighing sensor is suitable for sealing and adapting to harsh environments. Used for engineering force detection, overload safety detection, and impact force measurement and control. Suitable for large platform scales, truck scales, track scales, etc. You can choose a six wire wiring method. The column type weighing sensor has a large range and is widely used in the heavy industry field.
　
The above are LCH-5kN to LCH-500kN sensors_ Detailed information on Japanese NTS weighing sensors, if you are interested in LCH-5kN to LCH-500kN sensors_ If you have any questions about the price, delivery time, model, or inventory of Japanese NTS weighing sensors, please feel free to call18520271262 Obtain LCH-5kN to LCH-500kN sensors_ Latest price details for Japanese NTS weighing sensors.