【 PST sensor 】 PST-20kg~PST-7.5t_ Suncells Load Cell in the United States

　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　 　

【Guangzhou Zhongxin Automation Technology Co., Ltd】Professional supply of PST series American Suncells pull type S-type weighing sensors,(PST sensor) PST-20kg~PST-7.5t_Suncells Load Cell in the United States）Ensure fast delivery time, 100% genuine products, 10 years of industry experience, focus on high-end high-quality sensor services, and provide complete automation solutions. Relevant models of the PST series American Suncels pull-type S-type weighing sensor: PST-20kg, PST-30kg, PST-50kg, PST-75kg, PST-100kg, PST-150kg, PST-200kg, PST-250kg, PST-300kg, PST-500kg, PST-700kg, PST-750kg, PST-1t, PST-1.5t, PST-2t, PST-3t, PST-5t, PST-75t

Introduction to PST Series American Suncells Load Cell Products

English name: SUNCELLS
Product name:Load Cell
Product characteristics:S-type load cell
★ Made of high-quality alloy steel material
★ Material selection: stainless steel or alloy steel
★ Protection level: IP65 IP68
★ DEE series shapes available: right angle or rounded corner
Mainly used in hook scales, ingredient scales, packaging scales, electromechanical combination scales, and specialized force measuring devices.
★ Range options: 20kg, 30kg, 50kg, 75kg, 100kg, 150kg, 200kg, 250kg, 300kg, 500kg, 700kg, 750kg; 1t, 1.5t, 2t, 3t, 5t, 7.5t.
　
Installation dimensions of PST series American Suncells weighing sensors


　
Technical parameters of PST series American Suncells weighing sensors


　
Extended Reading

Fundamentals and methods of protective sealing
The foundation of the sealing protection of the weighing sensor is the application of protective surface adhesive to the resistance strain gauge. Plastic protective surface:
(1) Dielectric strength> 5000M, volume resistivity 10141018 Ω. cm;
(2) Has a strong cohesion with the metal surface, from this interface to prevent moisture penetration;
(3) Low moisture absorption and cohesive strength;
(4) The curing reaction will not release harmful compounds, and a non corrosive resistance strain gauge;
(5) The softness of the cured film and the elastic constant of the elastic component within the strain range.
The plastic brushing of the resistance strain gauge protective surface and the brushing time before cleaning are essential. During the production process, the weighing sensor completes the following two tasks, one of which is patch, pressure curing, curing relief, and quality inspection
Investigate, paste terminals, bridge crimping groups, and measure the quality standards of their insulation resistance in each process; The second is the overall cleaning of elastic components during the process of acceptable quality. After the overall cleaning of the elastic components, they must be quickly placed in a high-temperature test container, heated at 40 ℃, and kept warm for a certain period of time. The protective surface glue (1) for brushing teeth from the elastic components in the packaging box must be removed under dry environmental conditions. Its purpose is to prevent moisture during the production process of resistance strain gauges, lay the foundation, and ultimately protect and seal them.
　
Above【 PST sensor 】 PST-20kg~PST-7.5t_ Suncells Load Cell in the United StatesDetailed information, if you are interested in【 PST sensor 】 PST-20kg~PST-7.5t_ Suncells Load Cell in the United StatesIf you have any questions about the price, delivery time, model, or inventory, please feel free to call18520271262obtain【 PST sensor 】 PST-20kg~PST-7.5t_ Suncells Load Cell in the United StatesLatest price details.