LCD-100TMH Load CellA product belonging to the Celtron brand in the United States, it is a spoke type weighing sensor made of alloy steel without electrolytic nickel plating, with a protection level of IP67. It is suitable for weighing trucks/track scales, silos/hoppers/storage tanks, and general material testers.
. Introduction to the American Celtron LCD-100TMH Weighing Sensor Product
Product Description:
-For safety reasons, thin compression discs are designed as the Final Solution for some difficult applications with critical heights. Even when lateral forces are unavoidable during normal operation, the shear web design can provide excellent performance. A typical example of lateral force resistance is its application in car scales.
-The LCD is made of alloy steel and fully encapsulated in a special compound that meets IP67, providing excellent moisture resistance and protection.
Product series: LCD
Product Features
-Capacity: 60T, 100T
-Non electrolytic nickel plating on alloy steel
-High output small deformation
-Compact design with low cross-section
-Eccentric loading compensation
Product Application
-Truck/track scale
-Silo/hopper/storage tank weighing
-Universal material tester
-Tension/tension measurement
. Image of the LCD-100TMH weighing sensor from the United States
. American Celtron LCD-100TMH weighing sensor related models
LCD-60TMH through-hole
LCD-60TMH stepped hole
LCD-100TMH
. Dimensions of American Celtron LCD-100TMH weighing sensor products
. Technical parameters of American Celtron LCD-100TMH weighing sensor products
. Safety instructions for the American Celtron LCD-100TMH weighing sensor
1. The LCD series weighing sensors are designed for weighing applications and should not be considered compliant with relevant regulations for any other purpose.
2. To ensure safe operation, the load cell can only be used according to the instructions in the installation instructions. During use, it is also necessary to comply with the relevant legal and safety requirements of the application. This also applies to the use of attachments.
3. If the load cell is damaged, it may cause equipment damage or endanger personal safety. Therefore, users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained to avoid overload use.
4. The maximum load of the LCD-100TMH weighing sensor is 100T. When using it, attention should be paid to the possibility of instantaneous overload, which may also cause damage to the sensor.
Guangzhou Zhongxin Automation Technology Co., Ltd. focuses on launching the following brand products to ensure that they are brand new and authentic, with excellent prices. Welcome new and old customers to consult!
★ German HBM: Load cells - Z6F, C16A, RTN, HLCB1, PW2D, PW6D, PW2C, PW6K, PW6C, PW10A, PW12C, PW16A, PW22, S40A, C2 and other series
★ German HBM: Digital Sensors - C16I, FIT5AEB3, FIT7A
★ German HBM: Torque/force sensors - T40B, T22, T5, U9C, C9C, S9M, U2B, S2M and other series
★ German HBM: Weighing instruments/transmitters - WE2111, RM4220, BM40, AE101, AE301, EM201 and other series
★ American Celtron celtron: Sensors - STC, HBB, LPS, LOC, PSD, LCD, MBB, SQB, and other series
★ Tedea huntleigh: --341061635510151040102212601201241240 and other series
★ Transcell: Sensors - BSS, BSH, DBSL, SBST, CR, SBS, BAB and other series
★ Mettler Toledo: load cell -- TSC, TSB, MTB, GD, SLB415, SLB215, MT1022, MT1260, MT1241, SB, SBS, SBH and other series
★ METTLER TOLEDO: Digital Sensor&flash; GDD, SLC7200760, PDX, SLC820 and other series
★ Mettler Toledo: control instruments -- IND331, IND245, IND320L, IND230, IND560, B520, IND110, WM0800, AJB and other series
Sales Engineer - Miss Chen