DZXL-50kg sensor_ Middle Kessel sensor_ ZXSCELL load cell in the United States

After the calibration of the weighing instrument, it can be put into use. During the application process, attention should be paid to the maintenance of the weighing instrument The maintenance workload of weighing instruments is not significant, mainly by regularly checking the working condition of weighing instruments during inspections. The basic maintenance tasks include:

Regularly inspect and clean to avoid impurities accumulating on the tank, sensor, and junction box, which may affect the measurement;

Check to ensure that the tested container integrated with the top plate is floating and free from other mechanical contact or jamming phenomena;

Pay attention to changes in the mechanical structure of the tank body, including pipeline changes, equipment changes, etc. Any changes in the mechanical structure of the tank may affect the accuracy of weighing;

Regularly check the limit bolts or connecting rods to ensure sufficient clearance is maintained to avoid the limit bolts from touching the upper roof during normal production;

Check whether the sensors, connectors, and limit devices are excessively worn, and replace them if worn;

Check whether the junction box is sealed and whether various wires are securely connected;

Is there moisture or foreign objects present inside or around the junction box, is there strong electromagnetic interference equipment added near the junction box and sensors, and is there any new object that generates high temperature;

Check if the instrument cable is damaged and fixed on the scale body;

9. Check whether the scale body moves freely; During use, there may be inaccurate measurements. It is necessary to first check if there are any foreign objects relying on the weighing container pipeline or the pipeline above it, and if the limit bolts are touching, before conducting other inspections On site, it is simple to determine whether the measurement is accurate. Sometimes, one person can be arranged to stand in several load cell attachments to check whether the displayed values on the weighing controller are consistent and whether it is the person's weight. This method is simple and effective If the data displayed on each sensor is inconsistent, it means there is an angle difference. It can be judged that the data measured by this weighing instrument when measuring a heavy object is inaccurate, and the height of each sensor needs to be adjusted to eliminate the difference If there is no angular difference but the displayed data is incorrect, the scale needs to be recalibrated To judge whether the weighing body works normally, you can also push the weighed container or tank with your hand for a short time to see whether the displayed data changes and returns to the value before pushing If the previous value cannot be restored, it indicates that there is a problem with the external mechanical connection of the weighing body, and there is external force supporting the tested container or tank body