发布时间:2023-06-26 人气: 来源:1
Cantilever beam type weighing sensorIt can be divided into two types, namely shear beam load cells and corrugated pipe (bending beam) load cells, but due toBellows weighing sensorThe application is very extensive and usually listed separately. Therefore, the cantilever beam type weighing sensor usually refers to the shear beam weighing sensor by default, and this type will be mainly introduced next.
The appearance of cantilever beam type weighing sensors is mostly rectangular, and the strain gauge is located in the middle area of the sensor. It is suitable for equipment such as platform scales, belt scales, hopper scales, floor scales, mixing stations, and ingredient scales.
There are three holes above the cantilever beam type weighing sensor, distributed at both ends of the sensor, two of which are adjacent. These two holes are used to fix the sensor, while the other end has a hole for loading, which can bear weight well when paired with pressure bearing accessories. The following image shows the HLC model of the German HBM brand with attachments.
Next, we will provide information on three brands of cantilever load cells for further understanding.
1. German HBM brand HLC series weighing sensors
The HLC series weighing sensor from HBM in Germany is a cantilever beam type weighing sensor, with multiple models, versions, and accuracy levels available. It mainly has a small range, with a range of 100kg to 10T, high protection level, stainless steel material, sturdy and durable, and is suitable for almost any material tank, ingredient, platform scale, and level monitoring application. The widely used models include HLCB1C3, HLCB1D1, HLCB1C6, HLCB2C3, HLCA1C3, etc.
2. Mettler Toledo brand SB series SB, SBS, SBT load cells
Mettler Toledo's SB series cantilever beam load cells include three models, namely SB, SBT, and SBS. The differences between the three models are in the bearing holes and the matching connectors. The bearing hole of the SB model is a blind hole structure, and the accompanying connector is an SP connector; The bearing hole of the SBT model is a through-hole structure, and the accompanying connecting piece is an SPT connecting piece; The bearing hole of the SBS model is a threaded hole structure, and the accompanying connector is an SPS connector.
The three models of the Toledo weighing sensor SB series are all made of alloy steel, with a nickel plated surface and a protection level of IP67. They have high overall accuracy and can achieve C3 accuracy. They have good long-term stability and are suitable for weighing and controlling various ingredients such as ground scales, car scales, and building materials.
3. American Chuanli brand SBS series weighing sensors
The SBS cantilever beam weighing sensor of the American Transcell brand is made of high-quality alloy steel with a nickel plated surface for anti-corrosion treatment. It has been certified by NTEP, CMC, and OIML, and has the advantages of high accuracy, high stability, easy installation, and speed. It is suitable for equipment such as platform scales, mixing stations, belt scales, and ingredient scales.
4. The SLBH series weighing sensors of the US Zhongkessel brand
The SLBH-5t weighing sensor is a product of the Zxscell brand in the United States. It is welded and sealed with stainless steel material, sturdy and durable, with a range of 0.5t to 10t. It is suitable for equipment such as belt scales, hopper scales, and platform scales.