发布时间:2023-06-26 人气: 来源:1
Model 1030Load CellIt is a model from Vishay Tedea in the United StatesSingle point weighing sensorThe product is made of aluminum and has a small range of 2kg to 15kg. It is mainly used for platform scales, counting scales, grocery scales, laboratories, currency counters, and process weighing.
The accuracy level of the 1030 model is C2.5, OIML R60 certified, and FM certified versions are optional. The protection level of the 1030 model is IP65, and a special moisture-proof protective coating version can be selected, with a protection level of IP67.
The built-in overload protection device of 1030 can prevent overload. Two additional sensing lines provide feedback on the voltage reaching the weighing sensor. Full compensation for wire resistance changes caused by temperature changes and/or cable extension can be achieved by feeding this voltage into appropriate electronic devices.
The full range of the Tedia 1030 model is as follows:
1030-2kg
1030-3kg
1030-5kg
1030-7kg
1030-10kg
1030-15kg
The weighing sensor is a precision measuring element that must be handled with care during installation and transportation. Collision or falling of load cells can damage them. During installation and operation, suitable retainers must be used to protect the load cell from overload. During installation, no force or torque should be applied through the spring area.
If the weighing sensor is damaged, it can cause equipment damage or accuracy damage. Users must take appropriate safety measures (such as safety devices to prevent falling, collapsing, or overloading). For safe and trouble-free operation, the weighing sensor must not only be transported, stored, positioned, and installed correctly, but also be carefully operated and maintained.